iv
CHANNEL SPACE / DE-EMPHASIS Switch
Not present for USA, Canada, U.K. and Australia
The CHANNEL SPACE / DE-EMPHASIS switch on the rear
panel is set to the correct setting that prevails in the area to
which the unit is shipped. However, if the CHANNEL SPACE
/ DE-EMPHASIS setting is not matched to the area where
the unit is to be used; for instance, if you move from area 1
to area 2 as shown in the table to the right or vice versa,
desired reception of AM / FM broadcasts is not expected.
In this case, change the CHANNEL SPACE / DE-EMPHASIS
setting in accordance with the area corresponding to the
table. The CHANNEL SPACE / DE-EMPHASIS is switched
over at the same time.
•
When changing the setting of the CHANNEL SPACE /
DE-EMPHASIS switch, first unplug the power cord, and
then reset the switch, plug the power cord back in, and
turn the power switch on.
CHANNEL SPACE
DE-EMPHASIS switch
Area
CHANNEL
SPACE freq.
DE-
EMPHASIS
USA, Canada,
and South
American
Countries
Other
Countries
1
2
FM : 100 kHz
AM : 10 kHz
FM : 50 kHz
AM :
9 kHz
75
µ
s
50
µ
s
ND
AM
50
µ
s
FM 50kHz
AM 9kHz
75
µ
s
FM 100kHz
AM 10kHz
DE-EMPHASIS
CHANNEL SPACE
RF REMOTE CONTROL UNIT
RC-R0910
2WAY LCD REMOTE CONTROL UNIT
+
-
+
-
12
3
45
6
78
9
10
11
12
+10
0
+100
/
8
/
7
1
1
Unpacking
If any accessories are missing, or if the receiver is damaged or fails to operate, notify your dealer immediately. If your receiver was shipped to you
directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to
move or ship the receiver in the future.
Unpack your new receiver carefully and make sure that all the accessories are present:
Remote control unit
Batteries
AM Loop Antenna
FM Antenna
