11
Chapter One : Connecting Your Devices
Connections
Connecting Your Cable TV or Satellite Tuner, continued
Do not
plug in the receiver or devices to AC power until
you have connected all your devices.
This section focuses on the connections from your cable or
satellite tuner to the VR-4090/VR-4080/KRF-V7773D. Please
refer to your tuner’s instructions for more detail about its
connection jacks and capabilities.
The instructions in this section show one of several pos-
sible variations on connecting your tuner. For further assis-
tance on optional configurations, contact your cable or sat-
ellite provider.
To Connect a Cable TV Tuner with a
Composite (RCA) Video Output:
1. Review the information under “Before You Begin” on
page␣ 1. It contains important notes about the types of
video connections you can make.
2. Connect the audio and video cables from the cable
tuner’s Audio and Video Out jacks to the receiver’s
VIDEO2
,
VIDEO3
, or
VIDEO4
(VR-4090 only) PLAY
IN jacks as shown to the left.
3. Go to “Noting Your Devices” on page␣ 3 and note which
jack you used to connect your tuner. In addition, note
the brand name and model number of the tuner.
To Connect a Cable TV Tuner without a
Composite (RCA) Video Output:
1. Review the information under “Before You Begin” on
page␣ 1. It contains important notes about the types of
video connections you can make.
2. Connect the audio cables from the cable tuner’s Audio
Out jacks to the receiver’s
VIDEO2
,
VIDEO3
, or
VIDEO4
(VR-4090 only) PLAY IN jacks as shown to the left.
3. Leave the cable tuner’s video out (RF jack) connected
directly to your VCR or TV (wherever you already have it
connected). See “How Do I Operate Devices?” on
page␣ 28 of the
Users’ Guide
for details about using this
setup.
4. Go to “Noting Your Devices” on page␣ 3 and note which
jack you used to connect your tuner. In addition, note
the brand name and model number of the tuner.
To Connect a Satellite Tuner:
1. Review the information under “Before You Begin” on
page␣ 1. It contains important notes about the types of
video connections you can make.
2. If you satellite tuner has a digital output jack, connect a
digital (coaxial or optical) cable between the saatellite
tuner’s digital output jack and the receiver’s
VIDEO3
or
VIDEO4
digital input jack as shown in the figure on the
left. (The optical and
VIDEO4
jacks are available only
on the VR-4090.)
Note that the jack sets are linked, even though they are
not adjacent. You
must
connect all of the cables from
your satellite receiver to a linked jack set. For example,
if you connect the analog cables to
VIDEO2
and the digi-
tal optical cable to
VIDEO3
,␣ your satellite receiver will
not work correctly.
3. Connect the audio and video cables from the satellite
tuner’s Audio and Video Out jacks to the receiver’s
VIDEO2
,
VIDEO3
, or
VIDEO4
(VR-4090 only) PLAY
IN jacks as shown to the left.
4. Go to “Noting Your Devices” on page␣ 3 and note which
jack you used to connect your tuner. In addition, note
the brand name and model number of the tuner.
