8
|
English
General features
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator
turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator
blinks.
Loudness
Compensating for low and high tones during low
volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
1
Enter Loudness mode
Using the Control knob, select "DSP" > "SND
CONT" > "LOUD".
For the operation method, refer to <Function
Control mode> (page 9).
2
Select the Loudness
Turn the Control knob.
Each time you push the knob, the Loudness turns
ON and OFF.
3
Exit Loudness mode
Press the Control knob.
Audio Control
1
Select the source to adjust
Press the [SRC] button.
Refer to <Selecting the Source> (page 7).
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Rear Volume
"REAR VOLUME"
0 — 35
Subwoofer level
"SUBWOOFER LEVEL" –15 — +15
Balance
"BALANCE"
Left 15 — Right 15
Fader
"FADER"
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob, [
0
] and
[ATT] button.
Audio Setup
Setting the Sound system, such as Volume offset
and Dual Zone.
1
Select the source to adjust
Press the [SRC] button.
Refer to <Selecting the Source> (page 7).
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Setup the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Volume offset
"VOLUME OFFSET" –8 — ±0 (AUX: -8— +8)
Dual Zone System
"2 ZONE"
ON/OFF
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by <Dual Zone
System Setting> (page 33).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [VOL] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 8).
- The DSP Control will be disabled.
• You can use the Dual Zone System only when you have
set the rear speaker to any mode other than "None" in
the <Sound Management system> (page 10).
5
Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
B64-3770-00̲00̲M̲English.indd 8
B64-3770-00̲00̲M̲English.indd 8
07.5.10 2:03:35 PM
07.5.10 2:03:35 PM
