Kenwood KDC-X9006U Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 48

background image

40

|

English

Accessories

1

..........1

2

..........2

3

..........4

4

..........4

5

..........1

Installation Procedure

1. To prevent a short circuit, remove the key from the

ignition and disconnect the

-

battery.

2. Make the proper input and output wire

connections for each unit.

3. Connect the speaker wires of the wiring harness.
4. Connect the wiring harness wires in the following

order: ground, battery, ignition.

5. Connect the wiring harness connector to the unit.
6. Install the unit in your car.
7. Reconnect the

-

battery.

8. Press the reset button.

2

WARNING

If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.

¤

• If the power is not turned ON ("Protect" is displayed), the

speaker wire may have a short-circuit or touched the
chassis of the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.

• If your car’s ignition does not have an ACC position, connect

the ignition wires to a power source that can be turned on
and off with the ignition key. If you connect the ignition
wire to a power source with a constant voltage supply, as
with battery wires, the battery may die.

• If the console has a lid, make sure to install the unit so that

the faceplate will not hit the lid when closing and opening.

• If the fuse blows, first make sure the wires aren’t touching

to cause a short circuit, then replace the old fuse with one
with the same rating.

• Insulate unconnected wires with vinyl tape or other similar

material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.

• Connect the speaker wires correctly to the terminals to

which they correspond. The unit may be damaged or fail to
work if you share the

-

wires or ground them to any metal

part in the car.

• When only two speakers are being connected to the

system, connect the connectors either to both the front
output terminals or to both the rear output terminals (do
not mix front and rear). For example, if you connect the

+

connector of the left speaker to a front output terminal, do
not connect the

-

connector to a rear output terminal.

• After the unit is installed, check whether the brake lamps,

blinkers, wipers, etc. on the car are working properly.

• Mount the unit so that the mounting angle is 30° or less.

If You Want to Connect iPod

iPod
AUDIO OUT

KCA-iP200 (Optional accessory)

• No other optional accessory can be connected because

the USB connector and the AUX input are used for iPod
connection.

• Dual Zone System in <Audio Setup> (page 8) will become

unavailable.

Accessories/ Installation Procedure

B64-3770-00̲00̲M̲English.indd 40

B64-3770-00̲00̲M̲English.indd 40

07.5.10 2:03:55 PM

07.5.10 2:03:55 PM

«
...
38
39
40
41
42
...
»

Содержание KDC-X9006U

















































Отзывы:

Нет отзывов

Похожие инструкции для KDC-X9006U

Бренд: Magtek Страницы: 41

Бренд: Magtek Страницы: 34

Бренд: Magtek Страницы: 34

Бренд: Magtek Страницы: 4

Бренд: Magtek Страницы: 44

Бренд: Magtek Страницы: 23

Бренд: Yamaha Страницы: 8

Бренд: Renkforce Страницы: 4

Бренд: Majestic Страницы: 26

Бренд: VDO Страницы: 2

Бренд: Blitz Страницы: 13

Бренд: THine Страницы: 53

Бренд: Planet Audio Страницы: 8

Бренд: Sound Storm Страницы: 19

Бренд: Boss Audio Systems Страницы: 23

Бренд: Sena Страницы: 27

Бренд: Aiwa Страницы: 14

EXTA LIFE ROM-22

Бренд: Zamel Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды