Kenwood KDC-X9006U, Инструкция по эксплуатации

Страница: 28 / 48

28
|
English
Recording & Downloading
When music CD is inserted
Setting the recordable time
Set the recordable time for recording music CD.
1
Enter Mode setting
Using the Control knob, select "IMPORT CD" >
"MODE SET".
For the operation method, refer to <Function
Control mode> (page 9).
2
Set the recordable time
Turn the Control knob.
Display Setting Max. recording time*
"Standard" Standard recording Approx. 8 hours
"Long Play"
…
Approx. 12 hours
"Super Long Play" Extended time recording Approx. 16 hours
3
Exit Mode setting
Press the Control knob.
⁄
• * The maximum recordable time is obtained when there
is no other file. The actual recording time depends on
the song.
• The sound quality for Extended recording is lower than
for Standard recording.
Recording music CD
Music CD can be compressed and stored in internal
memory.
( ;
Int Mem
)
CD
;
CD001
v
CD001_010
v
CD000_001
v
CD001_003
v
v
v
v.
⁄
• Read <About Internal Memory> (page 26) before
starting copy.
• Music CD can be recorded only from the internal CD.
Recording is performed at x1 speed.
1
Insert a CD-DA
Insert the music CD to record.
Refer to <Playing CD & Audio file> (page 22).
2
Change to import mode
Using the Control knob, select "IMPORT CD" >
"IMPORT".
For the operation method, refer to <Function
Control mode> (page 9).
3
Select record mode
Push the Control knob towards right or left.
Multiple song record mode is set when the control
knob is turned right and single song record mode
is set when it is turned left.
4
Select the song to record
Turn the Control knob or push it towards up or
down.
Record mode Operation
Single song Selects a single song.
Multi song Selects all songs or from specified song to
the last song.
5
Confirm the song
Press the Control knob.
6
Name the target file or folder
Using the Control knob, select "NAME SET ".
Recording starts if "SKIP" is selected.
7
Enter Name set mode
Press the Control knob.
8
Enter the name
Operation type Operation
Move the cursor to the enter
character position Push the Control knob towards right
or left.
Select the character type* Press the Control knob.
Select the characters Turn the Control knob or push it
towards up or down.
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
⁄
• Enter characters by using a remote control with numbers
buttons.
Example: If you are entering "DANCE".
Character "D" "A" "N" "C" "E"
Button [3] [2] [6] [2] [3]
Times pressed 1 1 2 3 2
9
Confirm the name
Using the Control knob, select "ENTER ".
B64-3770-00̲00̲M̲English.indd 28 B64-3770-00̲00̲M̲English.indd 28 07.5.10 2:03:48 PM 07.5.10 2:03:48 PM