Kenwood KDC-X9006U Скачать руководство пользователя страница 46

Страница: 46 / 48

English

Protect:

The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.

➪

Wire or insulate the speaker cable properly

and press the reset button. If the "Protect"
code does not disappear, consult your
nearest service center.

Unsupported File:

An Audio file is played with a format that this
unit cannot support.

Copy Protection:

A copy-protected file is played.

DEMO MODE: The Demonstration mode has been selected.

➪

The <Demonstration mode Setting> (page

37) is ON. Turn it OFF.

No Device:

The USB device is selected as a source
although no USB device is connected.

N/A Device:

An unsupported USB device is connected.

➪

For the supported USB devices, refer to

<http://www.kenwood.com/usb/>.

No Music Data/ Error 15:

• The connected USB device contains no

playable audio file.

• The Internal Memory source contains no

playable audio file.

• Media was played that does not have data

recorded that the unit can play.

USB ERROR:

The connected USB device is rated a current
capacity higher than the allowable limit.

➪

Check the USB device with reference to

<http://www.kenwood.com/usb/>.

Some trouble may have occurred to the
connected USB device.

➪

Change the source to any source other

than USB. Remove the USB device.

iPod Error:

Connection to the iPod has failed.

➪

Remove the USB device and then

reconnect it.

➪

Confirm that the software for the iPod is

the latest version.

USB REMOVE: The Remove mode has been selected for the

USB device. You can remove the USB device
safely.

Over Capacity: Recording or copying was canceled because

internal memory space ran out while
recording from music CD or copying from
USB device.

➪

Delete unnecessary files and record or

copy once more.

Name Exists. Raname... :
Name Exists. Auto Rename? :

The name entered while recording CD
already exists. Or a file or folder with the same
name already exists while copying from USB
device.

➪

Change the name or delete the existing

file and record or copy once more.

Import Error:

Recording is canceled because there is a
scratch on the CD and it cannot be played.

Copy Error:

• An incompatible digital audio player was

used.

• Cannot copy because the USB device is not

firmly inserted.

Delete Error:
Format Error:

Abnormal condition detected while deleting
or formatting.

➪

Repeat the operation once more. This may

take some time. If the message recurs,
contact your nearest Kenwood dealer.

Can’t Download:
Download Error:

This unit does not work properly for some
reason.

➪

Press the reset button to download it

again. If this error is still displayed, consult
a local Kenwood dealer.

➪

Try all over again from the start. If this error

is still displayed, consult a local Kenwood
dealer.

No Display File:

No file that can be downloaded is contained
in the CD-R/ CD-RW/ USB device.

➪

Make sure that a files created with

referring to <http://www.kenwood.net-
disp.com> is contained in the CD-R/ CD-
RW/ USB device.
Do not delete the extension (.kbm)
created when the file was created.

Incorrect File:

The file selected to be downloaded has a
format that this unit cannot read.

➪

Recreate the file.

Writing Error:

Writing failed while the file was downloaded.

➪

Try the downloading again.

Troubleshooting Guide

B64-3770-00̲00̲M̲English.indd 46

07.5.10 2:03:59 PM

Содержание KDC-X9006U

















































Результаты поиска

Содержание KDC-X9006U

Отзывы:

Похожие инструкции для KDC-X9006U

Бренды по названию

Популярные бренды

Kenwood KDC-X9006U, Инструкция по эксплуатации

Результаты поиска

Содержание KDC-X9006U

Отзывы:

Похожие инструкции для KDC-X9006U

Бренды по названию

Популярные бренды