Kenwood KDC-X7016 Скачать руководство пользователя страница 57

Страница: 57 / 60

English

N/A Device:

• An unsupported USB device is connected.

• Connection to the iPod has failed.

➪

Check that the connected iPod is an iPod

that is supported. See <About Audio file>
(page 50) for information on supported
iPods.

No Music Data/Error 15:

• The connected USB device contains no

playable audio file.

• Media was played that does not have data

recorded that the unit can play.

USB ERROR:

Some trouble may have occurred to the
connected USB device.

➪

Remove the USB device, then cycle the

power switch to ON. If the same display is
repeated, use another USB device.

iPod Error:

Connection to the iPod has failed.

➪

Remove the USB device and then

reconnect it.

➪

Confirm that the software for the iPod is

the latest version.

USB REMOVE (Blink):

The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.

No Number:

• The calling party does not notify a caller ID.
• There is no phone number data.

No Data:

•  There is no outgoing call list.
•  There is no incoming call list.
•  There is no missed call list.
•  There is no phone book list.

No Entry:

The cell-phone has not been registered
(pairing).

HF Disconnect: The unit cannot communicate with the cell-

phone.

HF Error 07:

The memory cannot be accessed.

➪

Turn off the power and on again. If this

message still appears, press the reset
button on the control unit.

HF Error 68:

The unit cannot communicate with the cell-
phone.

➪

Turn off the power and on again. If this

message still appears, press the reset
button on the control unit.

Un Known:

The Bluetooth device cannot be detected.

Device Full:

5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.

PIN Code NG: The PIN code is wrong.

Connect NG:

The unit cannot be connected to the device.

Pairing Failed: Pairing error.

Err No Matching:

The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.

Too Soft:

Voice is too small and cannot be recognized.

Too Loud:

Voice is too large to be recognized.

Too Long:

The word or utterance is too long to be
recognized.

No Phonebook: Data is not contained in the phone book.

No Message:

No short message in In Box.

No Record:

The voice tag is not registered in the phone
book.

Memory Full: The number of voice tags reaches the

maximum number to be registered in the
phone book.

Favorite: No Memory:

The procedure is not registered to Favorite
Preset Memory

No Access:

The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.

No Voice:

No call.

Содержание KDC-X7016





























































Результаты поиска

Содержание KDC-X7016

Отзывы:

Похожие инструкции для KDC-X7016

Бренды по названию

Популярные бренды

Kenwood KDC-X7016, Инструкция по эксплуатации

Результаты поиска

Содержание KDC-X7016

Отзывы:

Похожие инструкции для KDC-X7016

Бренды по названию

Популярные бренды