using the attachments
Refer to recommended speed chart for each attachment.
knife blade
The knife blade is the most versatile of all the attachments. The
length of the processing time will determine the texture achieved.
For coarser textures use the pulse control.
Use the knife blade for cake and pastry making, chopping raw
and cooked meat, vegetables, nuts, pate, dips, pureeing soups
and to also make crumbs from biscuits and bread.
hints
●
Cut food such as meat, bread, vegetables into cubes
approximately 2cm/3/4in before processing.
●
Biscuits should be broken into pieces and added down the feed
tube whilst the machine is running.
●
When making pastry use fat straight from the fridge cut into
2cm/3/4in.cubes.
●
Take care not to over-process.
!
dough tool
Use for yeasted dough mixes.
●
Place the dry ingredients in the bowl and add the liquid down the
feed tube whilst the machine is running. Process until a smooth
elastic ball of dough is formed this will take 60 secs.
●
Re-knead by hand only. Re-kneading in the bowl is not
recommended as it may cause the processor to become unstable.
twin beater geared metal whisk
Use for light mixtures only eg egg whites, cream, evaporated milk
and for whisking eggs and sugar for fatless sponges. Heavier
mixtures such as fat and flour will damage it.
using the whisk
1 Fit the bowl onto the power unit, add the detachable drive shaft.
2 Push each beater securely into the drive head.
3 Fit the whisk by carefully turning until it drops over the drive shaft.
4 Add the ingredients.
5 Fit the lid - ensuring the end of the shaft locates into the centre
of the lid.
6 Switch on.
important
●
The whisk is not suitable for making one-stage cakes
or creaming fat and sugar as these mixes will
damage it. Always use the knife blade for cake
making.
hints
●
Best results are obtained when the eggs are at room
temperature.
●
Ensure the bowl and whisks are clean and free from grease
before whisking.
●
Carefully fold in flour and sugar by hand using a metal spoon for
fatless sponges and meringues.
slicing/grating discs
To use the discs.
reversible slicing/grating discs - thick
, thin
Use the grating side for cheese, carrots, potatoes and foods of a
similar texture.
Use the slicing side for cheese, carrots, potatoes, cabbage,
cucumber, courgette, beetroot and onions.
rasping disc
(if supplied)
Grates Parmesan cheese and potatoes for German potato
dumplings.
safety
●
Never remove the lid until the cutting disc has
completely stopped.
●
Handle the cutting discs with care - they are
extremely sharp
to use the cutting discs
1 Fit the bowl onto the power unit, add the detachable drive shaft.
2 Holding by the centre grip, place the disc onto the drive shaft with
the appropriate side uppermost.
3 Fit the lid.
4 Put the food in the feed tube.
5 Switch on and push down evenly with the pusher -
never put
your fingers in the feed tube.
hints
●
Use fresh ingredients
●
Don’t cut food too small. Fill the width of the feed tube fairly full.
This prevents the food from slipping sideways during processing.
●
Food placed upright comes out shorter than food placed
horizontal.
●
There will always be a small amount of waste on the disc or in
the bowl after processing.
citrus juicer
(if supplied)
Use the citrus juicer to squeeze the juice from citrus fruits (eg
oranges, lemons, limes and grapefruits).
cone
sieve
to use the citrus juicer
1 Fit the bowl onto the power unit, add the detachable drive shaft.
2 Fit the sieve into the bowl - ensuring the sieve handle is locked
into position directly over the bowl handle.
3 Place the cone over the drive shaft turning until it drops all the
way down.
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
●
The citrus juicer will not operate if the sieve is not
locked correctly.
●
For best results store and juice the fruit at room temperature and
hand roll on a worktop before juicing.
●
To help with juice extraction move the fruit from side to side
when juicing.
●
When juicing large quantities, empty the strainer regularly to
prevent the build up of pulp and seeds.
5
Содержание FPM260 series
Страница 3: ... ...
Страница 4: ... a b a b c d e f ...
Страница 148: ......
Страница 149: ...HEAD OFFICE Kenwood Limited 1 3 Kenwood Business Park New Lane Havant Hampshire PO9 2NH 41046 1 ...