before using your Kenwood appliance
●
Read these instructions carefully and retain for future reference.
●
Remove all packaging and any labels.
safety
●
The blades and discs are very sharp, handle with care.
Always
hold by the finger grip at the top, away from the
cutting edge, both when handling and cleaning.
●
Do not lift or carry the processor by the handle - or the handle
may break resulting in injury.
●
Always remove the knife blade before pouring contents from the
bowl.
●
Keep hands and utensils out of the processor bowl and liquidiser
goblet whilst connected to the power supply.
●
Switch off and unplug:-
●
●
before fitting or removing parts;
●
●
when not in use;
●
●
before cleaning.
●
Never use your fingers to push food down the feed tube. Always
use the pusher/s supplied.
●
Never fit the blade unit to the power unit without the
liquidiser or mill jar fitted.
●
Before removing the lid from the bowl or liquidiser/mill from the
power unit:-
●
●
switch off;
●
●
wait until the attachment/blades have completely stopped;
●
●
be careful not to unscrew the liquidiser goblet or mill jar from
the blade assembly.
●
Liquids should be allowed to cool to room temperature before
blending.
●
Do not use the lid to operate the processor, always use the
on/off speed control.
●
This appliance will be damaged and may cause injury
if the interlock mechanism is subjected to excessive
force.
●
Always unplug your food processor when not in use.
●
Never use an unauthorised attachment.
●
Never leave the appliance unattended when it is operating.
●
Never use a damaged appliance. Get it checked or repaired: see
‘service & customer care’.
●
Never let the power unit, cord or plug get wet.
●
Don’t let excess cord hang over the edge of a table or worktop
or touch hot surfaces.
●
Do not exceed the maximum capacities stated in the
recommended speed chart.
●
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
●
Children should be supervised to ensure that they do not play
with the appliance.
●
Only use the appliance for its intended domestic use. Kenwood
will not accept any liability if the appliance is subject to improper
use, or failure to comply with these instructions.
●
Misuse of your processor/liquidiser can result in injury.
●
The maximum rating is based on the attachment that draws the
greatest load. Other attachments may draw less power.
Refer to the relevant section under “using the attachments” for
additional safety warnings for each individual attachment.
before plugging in
●
Make sure your electricity supply is the same as the one shown
on the underside of your appliance.
●
This appliance conforms to EC directive 2004/108/EC on
Electromagnetic Compatibility and EC regulation no. 1935/2004
of 27/10/2004 on materials intended for contact with food.
before using for the first time
1 Remove the plastic blade covers from the knife blade.
Take
care the blades are very sharp.
These covers should be
discarded as they are to protect the blade during manufacture
and transit only.
2 Wash the parts see ‘care & cleaning’
key
processor
pusher
feed tube
lid
detachable drive shaft
bowl with drive shaft
power unit
speed/pulse control
safety interlocks
cord storage (at back)
glass liquidiser
blade unit
sealing ring
goblet
lid
filler cap
glass multi mill
(if supplied)
blade unit
sealing ring
jar
attachments
Not all of the attachments listed below may be included with
your food processor. Attachments are dependent upon the
model variant.
knife blade
!
dough tool
"
twin beater geared metal whisk
thick slicing/coarse grating disc
thin slicing/fine grating disc
rasping/parmesan disc (if supplied)
citrus juicer (if supplied)
centrifugal juicer (if supplied)
spatula (if supplied)
22
Содержание FPM260 series
Страница 3: ... ...
Страница 4: ... a b a b c d e f ...
Страница 148: ......
Страница 149: ...HEAD OFFICE Kenwood Limited 1 3 Kenwood Business Park New Lane Havant Hampshire PO9 2NH 41046 1 ...