TK-5810
(
BG
)
/5810H
(
BG
)
67
ADJUSTMENT
Item
Condition
Measurement
Adjustment
Specifi cations /
Remarks
Panel tuning mode
PC test mode
Test-
equipment
Unit
Terminal
Unit
Parts
Method
8. MIC sensi-
tivity check
*3
1) Adj item: [MIC]
Adjust:
[129]
Deviation
meter
LPF: 15kHz
HPF: OFF
Detector: ±PEAK/2
AG:
1kHz
PTT:
ON
1) Adj item: [Mic sen-
sitivity]
Deviation
meter
LPF: 15kHz
HPF: OFF
Detector: ±PEAK/2
2) Adj item: [129]
AG:
1kHz
PTT: Press [Trans-
mit] button.
Deviation
meter
Oscillo-
scope
AG
AF VTVM
Rear
panel
ANT
[Panel
tuning
mode]
[PF3]
[PF4]
[PC test
mode]
[ ],[ ]
Adjust AG input
to get a standard
MOD.
5.0mV±1.5mV
*3: The MIC sensitivity is related to the Max DEV adjustment. If the Max DEV has been adjusted correctly, the MIC sensitivity must be within 5mV ±
1.5mV at adjustment digit “129”.
9. QT Fine
Deviation
write *4
(Wide)
1) Adj item: [QTW]
Adjust:
[
✳✳✳
]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT:
ON
Press
[PF5] key to
store the adjust-
ment value.
1) Adj item: [QT Fine
Deviation (Wide)]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT: Press [Trans-
mit] button.
Press [OK] button
to store the adjust-
ment value.
Deviation
meter
Oscilloscope
Rear
panel
ANT
[Panel
tuning
mode]
[PF3]
[PF4]
[PC test
mode]
[ ],[ ]
Write the value as
followings.
133 (Reference
value)
0.75kHz
±50Hz
(Narrow)
1) Adj item: [QTN]
Adjust:
[
✳✳✳
]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT:
ON
Press
[PF5] key to
store the adjust-
ment value.
1) Adj item: [QT Fine
Deviation (Narrow)]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT: Press [Trans-
mit] button.
Press [OK] button
to store the adjust-
ment value.
Write the value as
followings.
132 (Reference
value)
0.35kHz
±25Hz
10. DQT Fine
Deviation
write *4
(Wide)
1) Adj item: [DQTW]
Adjust:
[
✳✳✳
]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT:
ON
Press
[PF5] key to
store the adjust-
ment value.
1) Adj item: [DQT Fine
Deviation (Wide)]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT: Press [Trans-
mit] button.
Press [OK] button
to store the adjust-
ment value.
Write the value as
followings.
101 (Reference
value)
0.75kHz
±50Hz
(Narrow)
1) Adj item: [DQTN]
Adjust:
[
✳✳✳
]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT:
ON
Press
[PF5] key to
store the adjust-
ment value.
1) Adj item: [DQT Fine
Deviation (Narrow)]
Deviation
meter
LPF: 3kHz
HPF: OFF
Detector: ±PEAK/2
PTT: Press [Trans-
mit] button.
Press [OK] button
to store the adjust-
ment value.
Write the value as
followings.
99 (Reference
value)
0.35kHz
±25Hz
*4: Refer to the “Necessary Deviation adjustment item for each signaling and mode” table on page 69.
Balance adjustment is common with the adjustment of all signaling deviation.