Kenwood FleetSync TK-5810(H), Руководство по обслуживанию

Страница: 73 / 137

TK-5810
(
BG
)
/5810H
(
BG
)
73
ADJUSTMENT
Item
Condition Measurement Adjustment
Specifi cations /
Remarks
Panel tuning mode PC test mode
Test-
equipment
Unit Terminal Unit Parts Method
(Narrow) 1) Adj item: [HRSIN]
Adjust:
[
✳✳✳
]
2) Adj item:
[L]
→
[C]
→
[H]
SSG output
: –70dBm (70.7µV)
(MOD: OFF)
After input signal
from SSG, press
[PF5] key to store
the adjustment
value.
1) Adj item: [RSSI
(–70dBm) (Narrow)]
2) Adj item: [Low]
→
[Center]
→
[High]
SSG output
: –70dBm (70.7µV)
(MOD: OFF)
After input signal
from SSG, press
[Apply] button to
store the adjust-
ment value.
SSG
AF VTVM
Oscillo-
scope
Rear
panel ANT
Ext.SP
connector
[Panel
tuning
mode]
[PF5]
[PC test
mode]
[Apply]
[Panel tuning mode]
After input signal
from SSG, press
[PF5] key to store
the adjustment
value.
[PC test mode]
After input signal
from SSG, press
[Apply] key to store
the adjustment
value.
(P25) 1) Adj item: [HRSIA]
Adjust:
[
✳✳✳
]
2) Adj item:
[L]
→ [C] → [H]
SSG output
: –70dBm (70.7µV)
(MOD: OFF)
After input signal
from SSG, press
[PF5] key to store
the adjustment
value.
1) Adj item: [RSSI
(–70dBm) (P25)]
2) Adj item: [Low] →
[Center] → [High]
SSG output
: –70dBm (70.7µV)
(MOD: OFF)
After input signal
from SSG, press
[Apply] button to
store the adjust-
ment value.
Radio Check Section
Item
Condition Measurement Adjustment
Specifi cations /
Remarks
Panel tuning mode PC test mode
Test-
equipment
Unit Terminal Unit Parts Method
1. Frequency
check
[Panel test mode]
1) CH-Sig: 1-3
PTT:
ON
[PC test mode]
1) Channel: 3
Signaling:
1
PTT : Press [Trans-
mit] button.
f. counter Rear
panel ANT Check K
±0.40ppm
-207Hz~+207Hz
@519.90MHz
K2
±0.40ppm
-187Hz~+187Hz
@469.90MHz
2. High
power
check
TK-5810(BG)
[Panel test mode]
1) CH-Sig: 1-1
2) CH-Sig: 2-1
3) CH-Sig: 3-1
PTT:
ON
[PC test mode]
1) Channel: 1
2) Channel: 2
3) Channel: 3
PTT: Press [Trans-
mit] button.
Power
meter
Ammeter 38.3~51.8W
14.0 A or less
TK-5810H(BG) K
Channel: 1/2
85.0~115.0W
Channel: 3
51.0~69.0W
K2
85.0~115.0W
3. Low power
check
TK-5810(BG)
[Panel test mode]
1) CH-Sig: 1-1
2) CH-Sig: 2-1
3) CH-Sig: 3-1
PTT:
ON
[PC test mode]
1) Channel: 1
2) Channel: 2
3) Channel: 3
PTT: Press [Trans-
mit] button.
4.0~6.0W
TK-5810H(BG) 45.0~55.0W