TK-5810
(
BG
)
/5810H
(
BG
)
23
DISASSEMBLY FOR REPAIR
■
Align the cable connecting the W2 terminal:
TK-5810H(BG) only
When you assemble the fi nal unit, align the cable con-
necting the W1 terminal as shown in fi gure, then insert it
into the connector (CN1) of the control unit.
Control
unit
CN1
Final unit
W1
W1 terminal
cable
Accessory
cable
W1 terminal
cable
■
Procedures after installing the case packing to
the chassis
After installing the case packing to the chassis, confi rm
that all corners of the upper/lower packing are securely
fi tted to the chassis. Place are shown in the arrow in the
fi gure below.
• Case packing (Upper)
TK-5810
TK-5810H
• Case packing (Lower)
TK-5810
TK-5810H
■
Sequence of tightening the screws for the up-
per/lower case to the chassis
Install the upper/lower case to the chassis and tighten
the screws in the order shown in the fi gure below.
• Case case
TK-5810
TK-5810H
1
2
3
5
6
4
1
2
3
5
4
•Lower case
TK-5810
TK-5810H
1
2
5
6
3
4
1
2
3
4