Kenwood DMX709S, Быстрый старт

Страница: 9 / 96

Adjusting the volume
You can adjust the volume (00 to 40)
by pressing VOL
J
to increase and
pressing VOL
K
to decrease.
• When volume level is below 15,
holding VOL
J
increases the
volume continuously to level 15.
Attenuating the sound
On the source control screen:
To cancel attenuation:
Initial settings
When you power on the unit for the first time or
initialized, the
<Initial Setup> screen appears.
Perform the initial settings.
Initial Setup
Finish
Language
English
Front Camera Enter
Rear Camera Enter
Enter
Demonstration
ON OFF
User Customize
Enter
Enter
Viewing Angle
Once completed, Home screen appears.
<Demonstration>
• ON (Initial): Activates the display demonstration.
• OFF : Deactivates the display demonstration.
<Language>
Select the text language used for on-screen
information.
•
English (Initial)/ Español/Français
• GUI Language ( Local (the language selected above)
(Initial)/ English ): Selects the language used for
displaying operation keys and menu items.
<Front Camera>
Make the settings to display the picture from the
connected front view camera.
<Rear Camera>
Make the settings to display the picture from the
connected rear view camera.
<User Customize>
Change the display design.
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
•
Under 0° (Initial) /5°/10°/15°/20°
Putting the unit in standby
1
Display the source/option selection
screen.
From the Home screen (page 4), touch as
follows:
2
Put the unit in standby.
On the source/option selection screen (page 10):
Turning off the screen
On the monitor panel
(Hold)
To turn on the screen: Press the DISP OFF button on
the monitor panel or touch the screen.
On the pop-up menu
To turn on the screen: Touch the screen.
Components Name and Basic Operations Components Name and Basic Operations
5 ENGLISH