Kenwood DDX4019BT, Инструкция по эксплуатации

Страница: 32 / 60

Settings Settings
<Speaker/X’over>
Setting the speakers and crossover
frequency
1
Select a car type ( 1 ), select the location
of the speakers ( 2 ), then display the
<Speaker Select> screen ( 3 ).
2
Select the speaker type ( 1 ), select the size
of the selected speaker ( 2 ), then display
the <X’over> screen ( 3 ).
• If no speakers are connected, select <None> .
• When setting the front speakers, also select the
speaker size for <Tweeter> .
3
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<TW Gain (L)>/<TW Gain (R)>
Adjusts the output volume of the tweeter (left/
right).
<TW FREQ>
Adjusts the crossover frequency for the tweeter.
<Gain>
Adjusts the output volume of the selected speaker.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Phase>
Selects the phase for the speaker.
<Time Alignment>
Make fine adjustments to the delay time of the speaker
output to create a more suitable environment for your
car.
Select the listening position ( 1 ), select
[Distance] or [Gain]( 2 ) to make an
adjustment , then adjust each speaker
setting (
3 ).
1
Select from <All> , <Front L> , <Front R> or
<Front All> .
2
Select an item to adjust.
[Distance] Adjusts the digital time alignment
value.
[Gain] Adjusts the output volume of the
selected speaker.
3
To determine the adjustment value, see the
following “Determining the value for <Position
DTA> adjustment”.
To initialize the setting value: Touch [Initialize] .
30 ENGLISH
04_DDX_2019ST_MN_Body02.indd 30 04_DDX_2019ST_MN_Body02.indd 30 28/6/2018 4:25:10 PM 28/6/2018 4:25:10 PM