How to open the MultiSensor
The device lids of the MultiSensor-RF/LAN or AlarmManager are in one surrounding groove on the device
bottom part jammed with the electronics. The lid can be triggered by slightly pulled apart and removed
without tools. Proceed as follow:
Open the device lid:
1. Case of an AlarmManager, remove the bottom-side screws, if any.
2. Lay down the device with the port side forward.
3. Pull the lid at the sides apart sightly (see picture).
4. The lid will snap out from the surrounding groove with a clicking noise.
5. Now, you can pull up the lid.
Close the device lid:
1. Lay down he device with the port side forward.
2. Pay attention, that the broader protrusion from the lid (space groove to casing edge) show in direction to
the connections.
3. Pull the lid by the sides apart slightly and put the casing lid on the bottom part.
4. Slide the lid on the bottom part till the lid snap in with a clicking noise
Page 13
!
(09-2012, subject to change)
!
www.kentix.de
