To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
INSTRUCTIONS FOR USE
2
Blue 32
– 146 2301 000(1)2005-03
INTRODUCTION
PURPOSE AND CONTENTS OF THIS
MANUAL
The purpose of this manual is to provide the Customer
with all necessary information to use the machine properly
in a safe way. It contains information about technical
characteristics, operation, machine storage, maintenance,
spare parts and safety conditions.
This manual is intended for Operators and Technicians
qualified for performing the machine maintenance.
Before carrying out any procedure on the machine, the
Operators and Qualified Technicians must read this
manual carefully. Contact the Manufacturer in case of
doubts regarding the interpretation of the instructions and
for any further information.
IDENTIFICATION DATA
The Machine Model and Serial Number are marked on the
nameplate that is located under the hood. (20, Fig. U).
The machine production year is shown after the Date
Code on the serial plate. (A04 means January 2004)
This information is useful when machine and engine
replacement parts are required. Use the following table to
write down the machine identification data for any future
reference.
OTHER REFERENCE MANUALS
–
Electronic Battery Charger Manual, also provided, is
to be considered an integral part of this manual.
The following manuals are also available:
–
Service Manual (that can be consulted at any Kent
Service Center)
–
Parts List, supplied with the machine
SPARE PARTS AND MAINTENANCE
All extraordinary maintenance and repairs must be carried
out by qualified personnel or by Kent Service Centers.
Only original spare parts and accessories should be used.
Call Kent for service or to order spare parts and
accessories. Specify the machine Model and Serial
Number when discussing your machine.
MODIFICATIONS AND IMPROVEMENTS
Our Company constantly improves its products and
reserves the right to make changes and improvements at
its discretion without being obliged to apply such benefits
to the machines that were previously sold.
Any modifications and/or the addition of accessories must
be approved and performed by the Manufacturer.
SAFETY - ACCIDENT PREVENTION
The following symbols indicate potentially dangerous
situations. Always carefully read this information and take
the necessary precautions to protect people and property.
No accident prevention program is effective without the
total cooperation of the person responsible for the
machine operation. Most of the accidents that may occur
in a factory, while working or transporting the machine, are
caused by the failure to comply with the most simple
prudence rules. A careful and prudent user is the best
guarantee against accidents and is a prerequisite to carry
out any accident prevention program.
SYMBOLS
MACHINE Model..........................................................
MACHINE Serial Number.............................................
DANGER!
Is used to warn of immediate hazards that
will cause severe personal injury or death.
WARNING!
Is used to call attention to a situation that
could cause severe personal injury.
CAUTION!
Is used to call attention to a situation that
could cause minor personal injury or
damage to the machine or property.
CONSULTATION
Consult the instruction booklet before
performing any operation.
