31
CapnoScan End-Tidal CO2 Monitor
C
F
C
F
The CapnoScan Run Screen:
The CO2 Run Screen
Set Up Hardware
Sensor:
1. Connect:
1) the interface cable to the CapnoScan port on the back of the SomnoSuite.
2) the side-stream sensor to the interface cable, ensuring that the connection is
secure.
2. Insert:
1) the sampling assembly into the back slot of the side stream unit.
2) the sampling needle into the expiratory line of the ventilator as close to the
animal as possible.
3. Attach the return line to the expiratory line, close to the ventilator.
For CapnoScan to accurately measure end-tidal CO2, the
animal must be connected to a ventilator.
