Kenmore 796. 4139 series, Инструкция по использованию и уходу

Страница: 23 / 65

22
HOW TO USE
CONTROL LOCK
Use this option to disable the
controls. The washer can only be
locked during a cycle. This feature
can prevent children from changing
cycles or operating the machine. Once set, the controls
remain locked and Control Lock must be turned OFF
before the controls can be used again. Once the washer
KDVVKXWRçWKHSRZHUEXWWRQZLOODOORZWKHPDFKLQHWR
be turned ON, but the controls will still be locked. When
the controls are locked, “CL” will display alternately with
the estimated time remaining.
Press and hold the EXTRA RINSE button for three seconds
to activate or deactivate the controls.
CLEAN WASHER
Detergent residue can build up in
the wash drum over time and can
lead to a mildewy or musty smell.
The CLEAN WASHER cycle is
specially designed to remove this buildup using bleach or
DQRWKHUFOHDQHUGHVLJQHGVSHFLoFDOO\IRUFOHDQLQJIURQW
load washers. Run the CLEAN WASHER cycle once a
month, or more often under heavy use conditions or if
odor is present.
See complete instructions in the CARE AND CLEANING
section.
Turn ON the washer and press the CLEAN WASHER
button. Selecting any other cycle after Clean Washer
has been selected will cancel the Clean Washer
cycle.
Fill the bleach dispenser to the MAX line with liquid
FKORULQHEOHDFK'RQRWRYHUoOOWKHEOHDFKGLVSHQVHU
2YHUoOOLQJZLOOFDXVHWKHEOHDFKWRGLVSHQVH
immediately.
NOTE:
For other drum cleaning products, follow
the cleaner manufacturer’s instructions and
recommendations. For powdered cleaning products,
add the cleaner to the main wash compartment of
the dispenser drawer. Place tablet cleaners directly
into the drum.
3
Press the START/PAUSE button to start the cycle.
4
After the cycle has ended, secure the door slightly
ajar with the door magnet. This will promote air
circulation and allow the interior of the machine to
dry. To use this feature, close the door just until it
contacts the door magnet.
NOTE: Do NOT use this cycle with clothes, and do
NOT add detergent or fabric softener.
AUTO SOAK
Use the AUTO SOAK option to
presoak garments to help remove
GLèFXOWVSRWVRUVWDLQVRQIDEULF
This option provides a 30-minute
presoak prior to the start of the selected cycle. At the
end of the presoak time, the selected cycle will use the
same water.
To use the AUTO SOAK feature, press and hold the
ACCELA WASH button for three seconds.