Kendrion Binder Magnete GmbH
Operating Instructions 76 ..P..B00
Last updated: 30 Dec. 2009
Page 4
Products:
Electromagnetically released spring-applied single-disc brake
76 14P10B00 76 16P10B00 76 24P10B00 76 26P10B00 76 14P11B00
76 16P11B00 76 24P11B00 76 26P11B00 76 14P13B00 76 16P13B00
76 24P13B00 76 26P13B00 76 14P16B00 76 16P16B00 76 24P16B00
76 26P16B00 76 14P19B00 76 16P19B00 76 24P19B00 76 26P19B00
76 14P24B00 76 16P24B00 76 24P24B00 76 26P24B00
Kendrion Binder Magnete GmbH
Industrial Drive Systems
Villingen, 30 Dec. 2009 by proxy ..................................................
Dr. Matthias Dannemann
(Head of Development at IDS)
1.4 Declaration
of
Incorporation (in accordance with Annex II, part 1, Section B of Machinery
Directive 2006/42/EC)
We hereby declare that the products below comply with the essential health and safety requirements
specified in Annex I of Machinery Directive 2006/42/EC:
Annex I General Principles, Annex I Sections 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.5.1
The partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of Machinery Directive 2006/42/EC. The
relevant technical documentation required for the partly completed machinery has been compiled in
accordance with Annex VII, part B of Machinery Directive 2006/42/EC. The manufacturer undertakes to
submit an electronic copy of the relevant technical documentation compiled for the partly completed
machinery if reasonably requested by national authorities.
Manufacturer:
Kendrion Binder Magnete GmbH
Person authorised
Dr. Matthias Dannemann
Industrial Drive Systems
to compile the
Kendrion Binder Magnete GmbH
Mönchweilerstr.
1
documentation:
Industrial Drive Systems
78048
Villingen-Schwenningen
Mönchweilerstr. 1
Germany
78048
Villingen-Schwenningen
Germany
Applied standards and regulations:
EN 60529
Enclosure protection ratings
DIN VDE 0580
Electromagnetic devices and components
EN 60079-0:2006
Electrical apparatus for explosive gas atmospheres (General requirements)
EN 60079-1:2004
Electrical apparatus for explosive gas atmospheres (Flameproof enclosures "d")
EN 60079-7:2007
Electrical apparatus for explosive gas atmospheres (Increased safety "e")
EN 61241-0:2006
Electrical apparatus for use in the presence of combustible dust
(General requirements)
EN 61241-1:2004
Electrical apparatus for use in the presence of combustible dust
(Protection by enclosures "tD")
Products:
Electromagnetically released spring-applied single-disc brake
76 14P10B00 76 16P10B00 76 24P10B00 76 26P10B00 76 14P11B00
76 16P11B00 76 24P11B00 76 26P11B00 76 14P13B00 76 16P13B00
76 24P13B00 76 26P13B00 76 14P16B00 76 16P16B00 76 24P16B00
76 26P16B00 76 14P19B00 76 16P19B00 76 24P19B00 76 26P19B00
76 14P24B00 76 16P24B00 76 24P24B00 76 26P24B00
Kendrion Binder Magnete GmbH
Industrial Drive Systems
Villingen, 30 Dec. 2009 by proxy ....................................................
Dr. Matthias Dannemann
(Head of Development at IDS)
1.5 Manufacturer's
liability
The manufacturer will not assume any responsibility for damage caused by failure to use the products in
accordance with their intended use or by failure to observe safety information and other instructions provided
in this manual. The information in this manual was correct and up-to-date before going to print. The
information contained herein shall not entitle users to raise claims with respect to components purchased at
an earlier date.
