Kemppi Robot Gun Mount T1, Руководство по эксплуатации

Страница: 8 / 23

8
Robot Gun Mount T1 © Kemppi Oy 2016 1616
OPERA
TING M
ANU
AL
6.7 Product-specific gun data
The table below presents product-specific gun data in line with EN 60 974-7.
Type Type of
cooling
Load
(A)
ED
(%)
Wire Ø
(mm)
Gas flow
(l/min)
Weight
(g)
CO₂ M21
500-g gas 350 320 100 0.8–1.6 10–30 900
500-w liquid 450 400 100 0.8–1.6 approx.
20
750
The cable assembly length is determined on the basis of the robot brand and model.
The load data have been determined under standard conditions, at low to medium
reflected heat, with free air circulation and an ambient temperature of about 28 °C.
In use under more rigorous conditions, the load values must be reduced by 10–20%.
Applications with above 360 A are possible in connection with the use of liquid-cooled
Kemppi robot welding guns.
6.8 Abbreviations
DC Direct current
ED Duty cycle
MIG Metal inert gas
MAG Metal active gas
MAC value Maximum allowable concentration of harmful substances in the
workplace
Voltage rating Insulation resistance, electric strength, and protection class
TCP Tool center point
6.9 The type plate
Robot Gun Mount T1 is identified by a sticker or a Kemppi logo. When contacting the
service staff, please remember to check the production stamp near the Kemppi logo.
For pulse-arc use, the load values are reduced by up to 35%.
Figure 3: T1 type plate
1
4
3
2
1. Type of device
2. Flange serial number
3. Consecutive number
4. Production date