Kemper KHS Mini Control System MASTER 2.0, Инструкция по установке и эксплуатации

Страница: 60 / 78

K410068602008-00 / 09.2018 60
In the „ OVERVIEW “ menu interface, the
configured valves and the linked sensors
are shown in an overview. Pure
measurement valves are not listed in the
“OVERVIEW”.
Overview
The overview merely shows the
current states. No configurations can
be carried out on this interface.
Click a valve to open the input box of
the "SYSTEM SETTINGS" menu
interface of the selected component.
If a valve is highlighted in black, this
means it is closed. If the valve is
highlighted in grey, it is open. If the
valve is highlighted in red, there is a
fault.
Manual mode / Automatic
The actuators can be triggered
manually. Click the button to open a
selection window. Use the selection
window to choose between three
settings (C valve) or five settings (A/B
valve) from a drop-down list. The
button indicates a fault in the system.
Automatic
=
Standard setting
Manual OPEN
=
Opens valve
Manual CLOSE
=
Closes valve
Group OPEN
=
With the A valve, the B
valve also opens
Group CLOSE
=
both close again
After a setting has been selected, the
duration of the setting can be defined.
Use the APPLY button to apply the
setting. Press the CANCEL button to
cancel the action.
60