Kemper KHS Mini Control System MASTER 2.0, Инструкция по установке и эксплуатации

Страница: 34 / 78

K410068602008-00 / 09.2018 34
Date / Time
The current time and current date of the KHS Mini Control System
-MASTER 2.0- are displayed in the grey boxes. To set the Control
System time, click the
APPLY DATE/TIME button. This causes the
Control System to apply the date and time settings of your PC, for
example. The KHS Mini Control System -MASTER 2.0- can switch
automatically between daylight saving and standard time. If you do
not want this setting, click the
button. If the button is showing
, the switchover between daylight savings and standard time is
not automatic
Netzwork
To establish a connection between the PC and the KHS Mini Control
System -MASTER 2.0- using a web browser, the required network
configurations can be entered in the boxes IP address, Subnet,
Gateway, prim. DNS and sec. DNS.
You can obtain the appropriate parameters for
integration into your network from your system
administrator.
The following parameters are configured as factory
defaults:

IP address: 10.1.23.150

Subnet: 255.255.255.0

Gateway: 10.1.23.254
The network settings can only be loaded when the configuration
is loaded using a USB stick. They are not imported when the
configuration is loaded using the web server.
Program switch
With the KHS Mini Control System -MASTER 2.0- it is possible to
switch between two flushing programs. The programs can be
configured in the Operating modes menu interface and the individual
Control System can be added (see Chapter 6.2).
If the button for the program switchover is set to
, the external
program switching is deactivated. If the button for the program
switchover is set to
, the external program switching is active.
The names of the flushing programs can be changed with an entry
in the related box. Use the "Current operating mode" drop-down list
to manually switch the flushing programs in the web server and to
block them for maintenance purposes. Use the "External input"
drop-down list to set the operating mode of the external input.
Maintenance:
The two flushing programs mentioned above can
be switched using the web browser and can be
blocked for maintenance purposes.