Kemper KHS Mini Control System MASTER 2.0, Инструкция по установке и эксплуатации

Страница: 64 / 78

K410068602008-00 / 09.2018 64
Configuration
Loading a configuration from a file
The "Configuration" function can be
used to install an existing configuration
in the connected KHS Mini Control
System. To do this, click the Search
button. The CFG file opens in the
window that then opens, see Fig. 6.7.3.
After the
LOAD CONFIGURATION FROM
FILE button has been clicked, the
selected configuration is then loaded
into the Control System.
The network and e-mail settings can
only be loaded when the configuration
is loaded using a USB stick. They are
not imported when the configuration
is loaded using the web server.
Backing up the configuration
You can use the "Configuration"
function to backup parameterised
configurations of the connected KHS
Mini Control System to your PC. To do
this, click the
WRITE CONFIGURATION
TO FILE button. In this window, see Fig.
6.7.4, you can back up the CFG file to
the desired folder on your PC.
Ill. 6.7.4 Selection dialogue „ Back up configuration file “
After successfully configuring your Control System, you are
recommended to save the configuration as a backup file. If the
KHS Mini Control System -MASTER 2.0- is defective, it can be
quickly replaced and the configuration can be read in. This
saves having to configure everything again.
Ill. 6.7.3 Selection dialogue „Upload configuration file“