Kemper KHS Mini Control System MASTER 2.0, Инструкция по установке и эксплуатации

Страница: 36 / 78

K410068602008-00 / 09.2018 36
Input box
If a KHS Mini Control System is selected in the selection
interface, the input box appears on the right-hand side.
Use this box to allocate the related actuators and sensors
to the KHS Mini-Control System.
If an error occurs in the Control System, it can be
reported across the entire system. To do this, set the
button to
. The remaining input options of the input
box are explained in the following.
Adding devices
Configuration (B valve)
Select control type
Choose the available control
types that can be used by the
selected
KHS Mini Control
System from a drop-down list.
The KHS Mini Control System -
MASTER 2.0 - should control a B
valve in this sample project.
Select valve
The possible valves are selected from
a drop-down list. In this sample
project, the KHS Mini Control System
-MASTER 2.0- should actuate a KHS
VAV maximum flow isolating ball valve
with spring reset and servo drive.
Alarm relay reports system-wide error