47
EN
KSB-170
CARE AND CLEANING
Disconnect the device from the power socket before cleaning. Before cleaning
The device, it should be sufficiently cooled down after use. Do not pour out the
liquid until it has cooled down sufficiently to avoid scalding. Never immerse the
device in water as it can be damaged.
Only clean the motor unit with a mild detergent and a damp cloth. Before using the parts again,
please dry them sufficiently. Do not use abrasive sponges or abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the device.
Clean the surface of the device with a soft cloth or sponge, a little warm water and a mild
washing-up liquid. Do not immerse the motor base in water.
You can clean the blade attachments in the dishwasher. Alternatively, you can clean it immediately
after use under running water and a little washing-up liquid. The blades are sharp, please clean
carefully. There is a risk of injury.
You can use the cleaning program to clean the containers after the mixing process. To do this, fill
the container halfway with lukewarm water and a splash of washing-up liquid. Put on the lid and
start the cleaning program. Then rinse well with water and dry off. Heavy soiling is best removed
with a dish brush.
METHODS TO REMOVE DISCOLORATION IN THE MIXING CONTAINER
Fill the blender jug halfway with warm water and add three tablespoons of vinegar essence to the
jar. For an even better effect, you can also add a teaspoon of baking soda. Let the mixture work
for 2-3 hours. Then rinse the container well with water.
You can fill the blender jug halfway with warm water and add baking soda. Let the baking powder
work for about an hour and then rinse it out well with clean water.
Alternatively, you can fill the blender jug halfway with warm water and add 2 to 3 tablets of
denture cleaner. Let the denture cleaner work for about an hour, then rinse it out well with clear
water.
You can achieve environmentally friendly cleaning with the juice of a lemon or with citric acid and
two to three tablespoons of baking powder or baking soda. Fill the container halfway with warm
water and add the ingredients. Then pour out the container and clean the inside walls with a non-
scratching soft sponge. Then rinse the container thoroughly with water. When exposed to direct
sunlight for a few hours and a little lemon juice or citric acid, discoloration usually disappears.
