46
DE
KSB-170
IN A FEW STEPS TO PERFECT PREPARATION
The left side contains the
automatic programs for mixing.
The right side is the manual
stepless setting of the mixing
speed from level 1 to the
maximum level 5.
USING THE ROTARY KNOB
Place the motor base on a flat, stable surface. It is very important that the surface is clean and dry.
Place the container on the motor base, after assembly, plug the power cord into a socket.
Put all the necessary ingredients in the container and close the lid; You can add more ingredients by
removing the small measuring cup lid and dropping ingredients through the filling area. After adding
an ngredient, close the measuring cup lid.
After putting on the blender jar, the rotary knob should be in the "OFF" position and the blender
beeps twice. If the mixer does not work, turn the knob back to the OFF position.
PRESET PROGRAMS
OFF POSITION: In this position the mixer is switched off. After the power plug is plugged in,
the mixer beeps twice in a row. It is now ready to mix.
CLEANING PROGRAM: The program starts after approx. 1.5 seconds and runs through 10
cycles of 2 seconds each.
OFF
FRUIT AND VEGETABLE PROGRAM: The program starts after approx. 1.5 seconds and runs
for two minutes.
MILKSHAKE PROGRAM: The program starts after approx. 1.5 seconds and runs for 1 minute.
NUTS AND KERNELS PROGRAM: The program starts after approx. 1.5 seconds and runs
for 1 minute.
ICE CRUSH PROGRAM: The program starts after approx. 1.5 seconds and runs for 1 minute.
The appliance can move slightly during the mixing process.
