43
EN
KSB-170
IN A FEW STEPS TO PERFECT PREPARATION
SAFETY NOTICE
7. If the desired consistency of the food to be mixed has not yet been reached, wait 1 minute
and repeat the mixing process up to three times in a row until the correct consistency is
achieved.
If more than three 1-minute blends are required, allow the blender base to cool for 2-3
minutes before starting the next blending process.
8. Never remove the container from the motor base before the motor has completely stopped.
Removing the container while the engine is still running can damage the blade clutch or
engine transmission.
9. Unplug the blender from the power supply when not in use.
Never leave the blender unattended while it is in use.
Particular attention is required when the device is operated by or near children.
Never use the motor for more than 2 minutes at a time, as this can cause permanent
damage to the device. If the motor stops working, unplug the device and let it cool down
for an hour before it is ready for use again.
To reduce the risk of injury, the blade attachment must be properly attached to the motor
base before operating the device.
Never run the blender when the container is empty.
Do not fill the blender jug with liquids that are already hot before blending.
