Kellyco DFX Скачать руководство пользователя страница 35

Страница: 35 / 60

11. Coarse G.E.B.

(Manual Ground Balance) allows viewing the cur-

rent automatic Ground Balance setting (Air/Ground

Balance) and/or manual overriding of the automatic

Ground Balance.

COARSE & FINE G.E.B. (Ground Exclusion

Balance, or ground rejection) allows manual over-

ride of the automatic balancing features to select a

speciﬁ c Ground Balance setting. COARSE allows

major adjustments. FINE allows minor adjustments

near the COARSE setting.

Before attempting manual Ground Balance adjust-

ments, turn off AUTOTRAC

since it will alter

any manual changes you make. Manual Ground

Balance will begin at the setting selected by the

automatic (Air/Ground Balance) sequence. An

Automatic Air/Ground Balance performed after

manual adjustment will cancel the manual setting.

To maintain a manual setting, the Automatic Air/

Ground sequence must be avoided by squeezing

and releasing the TRIGGER when, and if, the Air

Balance instruction appears. Air Balance instruc-

tions may appear during Basic Adjustment or Pro

Options selections following the manual adjust-

ment.

When manually adjusting the Ground Balance, it

is necessary to make an adjustment in COARSE

and/or FINE, then squeeze and release the TRIG-

GER. The TRIGGER can be held in, and the loop

lowered and lifted over the ground to check for a

change in sound which would indicate imperfect

Ground Balance. To return to the Ground Balance

display for further adjustment, press either of the

ARROW controls. When perfectly Ground Bal-

anced in a search mode, the TRIGGER can be

squeezed and held, and the loop lowered and lifted

Tips -

Use for controlled

reactions to speciﬁ c miner-

als or hot rocks. Settings

from 0 - 255 are available.

(G.E.B./Trac section)

Chapter 5 DFX

™

Pro Options

Содержание DFX





























































Результаты поиска

Содержание DFX

Отзывы:

Бренды по названию

Популярные бренды

Kellyco DFX, Руководство пользователя

Результаты поиска

Содержание DFX

Отзывы:

Бренды по названию

Популярные бренды