Kellyco DFX Скачать руководство пользователя

Страница: 43 / 60

Chapter 5 DFX

™

Pro Options

19. Hot Rock Reject

(Discrimination section)

Tips -

Hot Rocks are often

described or categorized

as either negative/magnetic

(cold rock) or positive/con-

ductive (hot rock). Typically

a negative or magnetic

“cold rock” will respond in

the search mode, how-

ever, once the trigger is

squeezed for pinpointing it

ceases to respond. A posi-

tive or conductive “hot rock”

will continue to respond

during pinpointing.

If hot rocks are a problem

in the area being searched,

in most cases a HOT

ROCK REJECT setting can

be found that will minimize

their target like responses

compared to real metal

target responses in the +95

category. Settings from

1 - 20 are available.

Hot rocks (rocks higher or different in mineraliza-

tion than the surrounding ground) respond as +95

on the V.D.I. scale. Unfortunately in some ground

conditions very deep, small, or unusual real metal

targets may also in95. In the past an opera-

tor would either 95 with the DISC EDIT

feature and hear hot rocks as a target response

“beep”, or 95 and not hear a target like re-

sponse from + 95 target types.

The HOT ROCK REJECT features allows a com-

promise between total rejection or total acceptance

of the + 95 V.D.I. indication. Disc Edit Accept or

Reject of +95 will only control the visual displaying

of +95 with the Visual Discrimination feature ON.

To reject or 95 with the audio discrimina-

tion, Audio DISC must be on, and the HOT ROCK

REJECT feature adjusted for your preference-re-

g95.

A HOT ROCK REJECT range of 0 to 20 is pro-

vided. At 0 the same characteristics can be expected

as EDIT 95 has provided with past

Whiteʼs models. At 20 the same characteristics can

be expected as EDIT 95 provided with

past Whiteʼs models.

At 10 a compromise between acc95 and

rej95 is achieved. A hot rock may or may

not produce a target like response depending upon

many factors such as the actual size of the hot rock,

degree of difference between the hot rockʼs miner-

alization and the surrounding ground, the current

ground balance setting, and the Sensitivity/Gain

settings.

Hot Rock Reject provides for 19 shades of gray be-

tween totally accepting all hot rocks (0), and totally

rejecting all hot rocks (20).

Содержание DFX





























































Результаты поиска

Содержание DFX

Отзывы:

Похожие инструкции для DFX

Бренды по названию

Популярные бренды

Kellyco DFX, Руководство пользователя

Результаты поиска

Содержание DFX

Отзывы:

Похожие инструкции для DFX

Бренды по названию

Популярные бренды