Kellyco DFX Скачать руководство пользователя

Страница: 11 / 60

Chapter 3 DFX

™

Quick Start

Live Search Screen - what is it telling me?

VISUAL

DISCRIMINATION

INDICATION-V.D.I. NUMBER

("TARGET REFERENCE NUMBER")

POSSIBLE TARGET IDENTITIES

("ICONS")

SIGNAGRAPH BAR-

GRAPH

1. V.D.I. Visual Discrimination Indication

("target reference number")

In the upper left hand-side of the display there is

a V.D.I. number that corresponds to the V.D.I.

SCALE painted on the top right-hand side of the

control box. It also corresponds to the Discriminate

Edit feature allowing you to reject or accept targets

based on their V.D.I. reference number. There are

"+" numbers for nonferrous (not of iron) targets,

and "-" numbers for ferrous (iron) targets. Rejected

V.D.I. numbers may not appear if the VISUAL

DISCRIMINATION feature is ON. Reasonably

consistent V.D.I. reference numbers (± ﬁ ve digits),

in a desirable area of the chart is a vote for digging

the target.

2. Possible Target Identities ("Probable or most

likely target")

To the right of the V.D.I. number, possible target

identities will be represented graphically. These

graphics are called ICONS. A fairly consistent indi-

cation of a desirable target is another vote to dig

the target. One or two possible target icons may

appear. There is signiﬁ cance to which icon appears

ﬁ rst. The ﬁ rst target to appear is always the most

likely, the second is another possibility, slightly less

likely than the ﬁ rst.

3. SignaGraph

The SignaGraph

at the bottom of the display

provides a ﬁ nal vote as to whether or not the target

should be dug.

Sweep the loop over the target several times

and look at the SignaGraph

. The SignaGraph®

automatically clears itself (FADE RATE) so that it

doesn't ﬁ ll the screen with information from past

loop sweeps. An operator has limited time to look

at the SignaGraph

. If you want to look at the

information again, sweep the loop over the target

several more times. The fading of the SignaGraph

information can be slowed or speeded (FADE

RATE) to operator preference. This is completed

in the PRO OPTIONS under DISPLAY. Automatic

AVERAGING and/or ACCUMULATING of Sig-

naGraph

information is also available (See PRO

OPTIONS).

Valuable targets will show up on the positive

side of the graph. The positive area of the chart is

the section located to the right of the zero.

Look for consistency. In ideal conditions, coins

and jewelry produce one or two bars to the right of

zero. Trash produces several bars, sometimes on

both sides of zero.

In less than ideal conditions, coins may produce

a wider pattern of bars. Most trash targets produce a

recognizably different pattern than valuable targets.

One of the most visual beneﬁ ts of the Signa-

Graph

is the ability to show a

smear

pattern

smear

on iron targets that often fool the other methods

of identiﬁ cation. An iron target will likely show

deﬁ nite bars on both the negative and positive sides

of the SignaGraph

, often

smearing

all the way

across the entire chart. Valuable targets should not

produce such obviously wide patterns. In very bad

ground conditions, a good target may have a few

small bar segments in the negative area due to min-

eralization. However, the pattern will show mostly

positive bars, in a fairly narrow tall group.

MULTIFREQUENCY

METHOD

CURRENTLY IN

USE

Содержание DFX





























































Результаты поиска

Содержание DFX

Отзывы:

Похожие инструкции для DFX

Бренды по названию

Популярные бренды

Kellyco DFX, Руководство пользователя

Результаты поиска

Содержание DFX

Отзывы:

Похожие инструкции для DFX

Бренды по названию

Популярные бренды