Kellyco DFX страница 16 Скачать руководство пользователя

Страница: 16 / 60

Chapter 4 DFX

™

Basic Adjustments

More Basics

All the MENU items are tied together so that the

ARROW up and down controls scroll through every

adjustment screen. If you continue to press the

ARROW

down

you can go beyond the last BASIC

ADJUSTMENT (View Angle) and into the PRO

OPTIONS. If the ARROW

control is pressed

after VOLUME, you will be scrolling backwards

through the options starting with the end of the Pre-

set Programs, then the MAIN MENU, then the end

of the PRO OPTIONS.

An important feature of the ARROW controls; If a

BASIC ADJUSTMENT has been made (for exam-

ple Volume) and the trigger has been squeezed and

released to return to a search mode, you can return

to the volume adjustment simply by pressing either

of the ARROW controls. This shortcut returns to

the last adjustment that was made thereby allowing

an operator to switch directly from a search mode

to the adjustment currently being ﬁ ne tuned. This

feature is desirable as you start using BASIC AD-

JUSTMENTS or PRO OPTIONS that are located

further down the menu listings, or any adjustment

that may require some trial and error to ﬁ nd the ap-

propriate setting.

If care is taken to use a desired adjustment screen

last (just prior to squeezing and releasing the TRIG-

GER for a search mode), Custom Programs can use

this ARROW RETURN feature to allow quick easy

access to the most used feature. Use that feature

(adjustment screen) last, just prior to squeezing and

releasing the TRIGGER for searching. Then during

searching, press either ARROW to return directly to

that adjustment screen.

"Hot Key" Shortcuts

"HOT KEYS" will save time as they allow easy

access, from the search mode, to the most needed

adjustments. They are painted on the bottom of the

control box for ﬁ eld reference.

NOTICE:

"HOT

KEY" shortcuts will not function from a cold start

(batteries just installed). To function from a cold

start the DFX

™

must be turned on and air/ground

balanced in any mode, then turned off. "HOT KEY"

shortcuts will then function.

COIN PROGRAM -

Squeeze & release TRIGGER

after automatic battery check.

SCROLL OPTION -

After battery check, use AR-

ROWS to scroll all the current settings /menus.

AIR/GROUND BALANCE -

In search mode,

press ENTER to re-Air/Ground Balance.

GROUND BALANCE ONLY -

While searching,

hold the TRIGGER and press ENTER.

BATTERY CHECK -

While searching, hold the

TRIGGER and press ARROW

down.

Squeeze and

release TRIGGER to return to searching.

REVERSE DISPLAY -

While searching, hold

the TRIGGER and press ARROW DOWN. Press

ARROWs for light/dark background. Light or dark

background will not change battery life. It will

make the display easier for some to read, particular-

ly in certain light conditions. It will work in com-

bination with backlight. Reversed display is only

accessible through the "HOT KEYS".

BACKLIGHT -

In search mode, hold TRIGGER

and press MENU. Release TRIGGER, press

ARROWS to set.

VIEW ANGLE -

While searching, hold the TRIG-

GER and press ARROW

. Release TRIGGER,

press ARROWS to set.

Содержание DFX





























































Результаты поиска

Содержание DFX

Отзывы:

Похожие инструкции для DFX

Бренды по названию

Популярные бренды

Kellyco DFX, Руководство пользователя

Результаты поиска

Содержание DFX

Отзывы:

Похожие инструкции для DFX

Бренды по названию

Популярные бренды