Kellfri 35-FDM160 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 56

background image

6

Table of Contents >>

USE

Only those who understand the safety instructions and the operating manual may use the equipment

or product. Exercise caution and care when working with the equipment or product and only use

it in the way described in the instruction manual.

There is a risk of crushing when working with equipment that has moving parts. Exercise caution

when working with equipment with hydraulic hoses, as oil under pressure can penetrate the skin.

Immediately seek medical attention if this should occur. Always work alone with equipment that

is made for working alone.

Respect the equipment's risk zone.

For further information about your machine, read the machine's operating manual.

DANGER!

CAUTION!

NOTE

Warning symbols identify important safety aspects in this manual in order to help you and others avoid dangers and

accidents. When using the machine: Be extremely careful!

Warning!

This symbol indicates that a serious accident will occur if the directions in the operating manual are not
followed. The accident will lead to serious injury, possibly death, or serious damage.

This symbol indicates that an accident will occur if the directions in the manual are not followed.
The accident will lead to serious injury or damage.

This symbol indicates that an accident may occur if the directions are not followed.
The accident will lead to injury or damage.

NOTE indicates the risk of a breakdown if the directions are not followed.

Where the machine is used professionally, employers are responsible for ensuring that users of the machine

have theoretical and practical knowledge of the machine and that work is performed in a safe manner. Stay

informed by complying with work environment legislation; contact your local work environment authority.

AFTER USE

•

Ensure that the equipment/product is standing on level ground when it is disconnected.

Use stabilisers, if included with the product/tool.

•

Wash, rinse with water and dry if necessary.

•

Re-lubricate if necessary.

«
...
4
5
6
7
8
...
»

Содержание 35-FDM160

























































Отзывы:

Нет отзывов

Похожие инструкции для 35-FDM160

Бренд: Salvis Страницы: 40

Бренд: IDEAL Страницы: 2

Бренд: Panasonic Страницы: 30

Бренд: Radarcan Страницы: 40

Бренд: Facnor Страницы: 33

Бренд: Gaspardo Страницы: 196

Бренд: RAB Страницы: 2

Бренд: Hacker Страницы: 2

Бренд: J.P. SELECTA Страницы: 8

Бренд: Haemonetics Страницы: 134

Бренд: Hadeco Страницы: 72

Бренд: Halyard Страницы: 88

Бренд: HALDER Страницы: 2

Бренд: Hällde Страницы: 40

Бренд: Hällde Страницы: 6

Бренд: IDEAL Networks Страницы: 10

Бренд: Ransomes Страницы: 282

Ransomes HR 6010

Бренд: Jacobsen Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды