Keller ITS CellaPort PT 120, Руководство по эксплуатации, Страница: 37 / 72

Operating manual PT 11x, 12x,13x
31
When automatic temperature data output is activated, the pyrometer will
not display the parameter settings when it is switched on. Instead, the
pyrometer will instantly begin transmitting data.
Temperature data format
Byte Negative Temperature Positive Temperature Temperature exceeds
measuring range
Temperature falls below
measuring range
1 Minus symbol "-" Space Space Space
2 Digit 1000 Digit 1000 Minus symbol "-" Minus symbol "-"
3 Digit 100 Digit 100 "O" "U"
4 Digit 10 Digit 10 "V" "N"
5 Digit 1 Digit 1 "E" "D"
6 Decimal point "." Decimal point "." "R" "E"
7 Decimal place Decimal place Space "R"
8 Space Space Space Space
9 Unit "C" or "F" Unit "C" or "F" Minus symbol "-" Minus symbol "-"
10 Space Space Space Space
11 Carriage Return Carriage Return Carriage Return Carriage Return

The cycle time in which the temperature reading is transmitted can be
set via parameter
ACYC
(minimum cycle duration is 0.1 second).
17.4 User Recalibration
If ever required, the pyrometer can be recalibrated. Go to Submenu Cali-
bration. Press command „K“ and then enter the password „100“ to ac-
cess the calibration menu.
------------------------------------------------------------------
Submenu CALIBRATION
------------------------------------------------------------------
Name .... "Pyrometer PT Series"
Menu mode ............. default
1: [LAMBDA 1 CALIBRATION]
A: Reset settings to factory default
E: Set menu mode
S: Set pyrometer name
Z: End Calibration-Mode
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>CALIBRATION >
You can reset all configurations you have made to your pyrometer and
restore the factory default settings using command "A". This also applies
to data acquisition parameters, LED and buzzer.
Press command "E" if you would like to view all parameters which are
otherwise hidden. Because this list of menu items is quite long (Chapter
All signs/symbols are ASCII coded; preceding zeros will be
transmitted