Keller ITS CellaPort PT 120 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 72

Keller ITS CellaPort PT 120 Скачать руководство пользователя страница 13

Operating manual PT 11x, 12x,13x

7

6

Charging the batteries

Connect the battery charging socket of the CellaPort to the provided
power supply (9 V DC). The charge indicator lights as long as the batter-
ies are being charged. A complete charging cycle takes approx. 15
hours.

7

Preparing the pyrometer for measurements

7.1

General Information

The pyrometer’s field of view must remain unobstructed. Any obstruction
may lead to measurement errors.

7.2

Diopter compensation

7.3

Brightness control to protect the eye

Only  use  the  power  supply  which  comes with  the  pyrome-
ter.  Do  not  use  any  other  power  supply  as  this  may  cause
irreparable damage to the device.

The pyrometer offers diopter compensa-
tion to adjust the sighting device to the
user’s vision

.

Turn the ring until you see

a sharp image of the target spot indica-
tion in the viewfinder.

Instruments  with  a  measuring  range  of  >
2000  °C  are  equipped  with  a  polarisation
filter  to  control  brightness  and  protect  the
user’s eye.

The charger is only for charging the battery.
The rechargeable battery is only charged when the pyrom-
eter is switched off.

«
...
11
12
13
14
15
...
»

Содержание ITS CellaPort PT 120









































































Отзывы:

Нет отзывов