kelda BubbleSpa 95005000, Руководство пользователя

Страница: 21 / 28

Kelda showers are designed for easy maintenance and should give a safe and consistent performance, provided that:
1.
Kelda showers are installed, commissioned, operated and maintained in accordance with this installation guide.
2.
Periodic attention is given as necessary to maintain the product in good functional order.
Maintenance must be carried out in accordance with these instructions, and must be conducted by designated, qualified
and competent personnel. Kelda showers are built with the highest quality components which are designed for a long life,
but due care must be taken during maintenance to avoid damage.
External Surfaces
External surfaces of the showerhead may be wiped clean with a soft cloth and if necessary, a mild cleaning or descaling
solution can be used. Always remove cleaning agent residue as this can discolour the surface. Care must be taken not to
allow bleach, chlorine or other strong cleaning agents onto or inside the product.
Maintenance
1 2
Switch off the water and power supply and disconnect the power
cable. Then dismount the showerhead using a spanner and place
it onto a soft cloth. Then slide the Dust Cap off the showerhead
as shown with both hands. When dismounting the showerhead be
careful not to get any water onto the fan or PCB.
Remove the Dust Filters from the Dust Cap as shown and clean
the Dust Filters.
Cleaning Dust Filters
The Dust Cap can be removed from the BubbleSpa showerhead in order to clean the Dust Filters. The Dust Filters can be
removed and cleaned. Ensure that the Dust Filters are dry upon replacement.
21