kelda BubbleSpa 95005000, Руководство пользователя

Страница: 15 / 28

Exposed Installation
18
16
Switch off the water then attach the Power Cable by aligning the
2 arrows on the connectors and then pushing the connectors
together until a click is heard. Then place the cables into the clips
on the showerhead. Turn on the power supply to the showerhead.
17
Run the showerhead with power to test the air and water supply,
we recommend running this test at 38°C. Please note the bubbles
don’t form as consistently below 20°C. Once you are satisfied with
the bubbles, remove the protective film from the faceplate and
enjoy your BubbleSpa shower.
Once the power is turned on, the Button Light on the showerhead
will light up. This is an indicator that power is being supplied to
the showerhead. If you need to disconnect the power cable, first
isolate the mains. Then pull back the outer layer of the larger
connector then remove the small connector.
Warning!
•
Always check for hidden pipes and
cables before drilling
•
Run water through hot and cold
pipes to clear debris from pipework
before connecting Kelda BubbleSpa
Shower
!
15