kelda BubbleSpa 95005000, Руководство пользователя

Страница: 13 / 28

Exposed Installation
9
Screw the BubbleSpa showerhead onto the Exposed Arm
Assembly. Use a 23mm spanner on the top half of the Ball Joint
and a 28mm Spanner on the bottom half of the Ball Joint.
11
Use the cut out on page 28 to mark out and drill the holes for the
Handset Holder. Then Place the Wall Plugs inside the holes and
screw the Mounting Brackets onto the wall using the Wall Screws.
10
Feed the power cable of the Exposed Arm Assembly into the wall
then place the Exposed Arm Assembly down onto the Shelf Mixer
and on the Wall Bracket. Secure the Exposed Arm Assembly onto
the Wall Bracket with the Retaining Screws.
8
Place the Handset Holder onto the Mounting Brackets and secure
it using the Grub Screw.
13