Maintenance
1
Fill a suitably sized bowl or tray 1-2cm deep with a cleaning
solution comprised of x parts white vinegar and x parts water.
2
Unclip the power cable and unscrew the showerhead (be sure
to support the weight of the showerhead as it is unscrewed) and
place it into the bowl/ tray nozzles first.
3
4
Using a funnel, pour some cleaning solution into the head of
the shower head. Leave the shower head for 45minutes - 1
hour.
Tilt the showerhead to the maximum angle (10 degrees) that the
ball joint will allow to drain any excess water from inside. Leave
the showerhead in this position for at least 1 hour to drain as
much water as possible.
53
