Exposed Installation
Use the measurements provided to mark out the holes for the
bracket and the Fixing Bracket. If cold and water inlets are present,
measure where the bracket holes would be from the inlets. Use the
Alignment Tool to help mark out the holes for the Fixing Bracket.
1
Drill the holes for the Arm Bracket. Then screw in the Arm
Bracket using the Rawl Plugs and Screws provided.
2
Screw the Fixing brackets and Spacer Bracket into the wall using
the provided Wall Screws and Rawl Plugs. The silicone padding
can be placed in between the wall and Fixing brackets to protect
the wall. The Alignment Tool can be used to assist with screwing
in the holes.
3
4
!
Insert an olive into the collars and screw the Collars onto the
Fixing Brackets.
Warning:
Read through to the end
prior to commencing installation!
36
