Specification and Operating Instructions
KLT11BB Temperature Digital Controller
Description
Installation
NOTE: Unit must be mounted away from vibration, impacts,
water and corrosive gases.
Cut hole in panel
2.80 x 1.14 inches)
Apply silicone (or rubber gasket) around the perimeter of
the hole to prevent leakage.
Insert unit into hole of panel.
Slide removable fitting clips onto unit from the back until
secure to panel.
Remove back cover to wire unit
Wiring diagram is displayed on the top of the unit
Note: DO NOT INSTALL PROBE CABLE NEAR POWER
CABLES.
Replace cover once wiring is completed.
The KLT11BB is designed for many heating and cooling,
high temperature applications. The probe temperature is
displayed on the bright 3-digit display. The user is able to
program 18 different parameters including set point,
hysteresis, cycle time and ambient probe adjustment using
the silicone front keypad. The unit features error or alarm
warning, internal buzzer and password protection. Select
between thermocouple J, K or S type, temperature display in
ºC or ºF and 115VAC, 230VAC or 12VAC/DC power supplies.
The model reference is given by: KLT11BB - WXYZ
Where each sufix can take the following values:
W
Thermocouple Type J, K, S
X
Display Color
R=Red, G=Green
Y
Supply Voltage
230=230VAC, 115=115VAC
12=12VAC/DC
Z
Units
C=ºC, F=ºF
•
•
•
•
•
•
•
•
Model references
71 x 29 mm (
Technical Data
Supply voltages
115 VAC10%, 230 VAC10%, 12 VAC/DC 10%
Supply powers
4VAC (230V)
1% of full scale
1º (3 digits)
Display
3-digit and sign (red or green)
Output
SPDT relay 250V / 15(5)A 30LRA
Dimensions
76 x 34 x 60 mm (3 x 1.34 x 2.36 inch)
Front Protection
IP64
Storage temperature
-20ºC to 80ºC (
-
4 to 176ºF)
Operating temperature
0ºC to 70ºC (32 to 158ºF)
Probe range
0ºC to 700ºC (32 to 999ºF) for thermocouple J
0ºC to 999ºC (32 to 999ºF) for thermocouple K,S
Accuracy
Better than
Resolution
Input
Thermocouple (types J, K or S)
1 2
7 8 9 10 11
SUPPLY
POWER
Probe input
OUTPUT
NC COM NO
+
_
Wiring Diagram
ETDT1060I_070221
E L E C T R O N I C A
E L E C T R O N I C A
Electrónica Keld, S.L. Phone: +34 976 429 099
Pol.Ind. Empresarium. C/Lentisco, 15
Fax:+34 976 593 532
50720 - La Cartuja Baja, ZARAGOZA
E-mail: [email protected]
Spain
Web: http://www.keld.es
