manualshive.com logo in svg

Keithley DAS-1800ST Series, Руководство пользователя, Страница: 92 / 139

Поделиться
Скачать
Keithley DAS-1800ST Series Скачать руководство пользователя страница 92

 

7-6

Troubleshooting

 

Testing the Accessory Slot and I/O Connections

 

When you are sure that the computer is operating properly, test the 
computer accessory slot and I/O connections using another 
DAS-1800ST/HR Series board that you know is functional. To test the 
computer accessory slot and the I/O connections, follow these steps:

1. Remove computer power again, and install a DAS-1800ST/HR Series 

board that you know is functional. Do not make any I/O connections.

2. Turn computer power ON and check operation with the functional 

board in place. This test checks the computer accessory slot. If you 
were using more than one board when the problem occurred, use the 
functional board to test the other slot, as well.

3. If the accessory slots are functional, use the functional board to check 

the I/O connections. Reconnect and check the operation of the I/O 
connections, one at a time.

4. If operation fails for an I/O connection, check the individual inputs 

one at a time for shorts and opens.

5. If operation remains normal to this point, the problem is in the 

DAS-1800ST/HR Series board(s) originally in the computer. If you 
were using more than one board, try each board one at a time in the 
computer to determine which is faulty.

6. If you cannot isolate the problem, refer to the next section for 

instructions on obtaining assistance.

 

Technical Support

 

Before returning any equipment for repair, call Keithley for technical 
support at:

 

1-888-KEITHLEY

Monday - Friday, 8:00 a.m. - 5:00 p.m., Eastern Time

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-1800ST Series












































































































































Отзывы:

Нет отзывов