manualshive.com logo in svg

Keithley DAS-1800ST Series, Руководство пользователя, Страница: 43 / 139

Поделиться
Скачать
Keithley DAS-1800ST Series Скачать руководство пользователя страница 43

2-20

Functional Description

The about trigger is always an external digital trigger. If you specify an 
about trigger, the operation stops when a specified number of samples has 
been acquired after the occurrence of the about-trigger event. As 
described in the following sections, the availability of the about trigger 
provides the capability to define operations that acquire data before a 
trigger event (pre-trigger acquisition), operations that acquire data about 
(before and after) a trigger event, and operations that acquire data after a 
trigger event (post-trigger acquisition).

Pre-Trigger Acquisition

In pre-trigger acquisition, the data of interest appears before a specific 
digital trigger event. Acquisition starts on an internal, external analog, or 
external digital trigger event and continues until the digital trigger event. 
Pre-trigger acquisition is available with DMA-mode operations only.

About-Trigger Acquisition

In about-trigger acquisition, the data of interest appears both before and 
after a specific digital trigger event. Acquisition starts on an internal, 
external analog, or external digital trigger event and continues until a 
specified number of samples has been acquired after the digital trigger 
event. About-trigger acquisition is available with DMA-mode operations 
only.

Post-Trigger Acquisition

In post-trigger acquisition, the data of interest appears after a specific 
event. Acquisition starts on an internal, external analog, or external digital 
trigger event and continues until a specified number of samples has been 
acquired or until the operation is stopped by software.

Gates

A gate allows conversions to proceed while in the active state. (The active 
state is software-selectable.) Connect the external gate to TGIN (pin 46 of 
the main I/O connector or pin 42 of STA-1800U connectors J1 and J2).

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-1800ST Series












































































































































Отзывы:

Нет отзывов