manualshive.com logo in svg

Keithley DAS-1800ST Series, Руководство пользователя, Страница: 126 / 139

Поделиться
Скачать
Keithley DAS-1800ST Series Скачать руководство пользователя страница 126

Analog Output Subsystem

C-19

the digital input data on the Logical Channel and then compared against 
the 

pattern 

for a match/mismatch. DriverLINX will use hardware 

triggering if the Digital Start Event corresponds to a positive or negative 
edge at input port line, 

DI 1/TGIN

 [B40] for DAS-1800HC and 

TGIN 

[46] for other DAS-1800 models. During an AO task running in the 
recycle mode, if Simultaneous = TRUE, and the Start Event is a hardware 
Digital Input trigger, the DI event will restart the FIFO pointer to 
beginning.

Data Coding

The output range of each D/A channel is fixed at ±10V for all DAS-1800 
boards except the DAS-1800AO which has two software programmable 
ranges; ±5V and 

±

10V.

The DAS-1800ST-DA uses 2’s complement data coding for the four 
12-bit D/A channels. The output range is fixed at ±10 volts. The minimum 
DAC code is -2048 (-10V) and the maximum code is +2047 (+9.9951V).

The DAS-1802HR-DA uses 2’s complement data coding for the two 
16-bit D/A channels. The output range is fixed at ±10 volts. The minimum 
DAC code is –32768 (–10V) and the maximum code is +32767 
(+9.9997V).

The DAS-1800HC uses split binary data coding for the two 12-bit D/A 
channels. The output range is fixed at ±10 volts. The minimum DAC code 
is 0 (–10V) and the maximum code is 4095 (+98.9951V).

The DAS-1800AO uses 2’s complement coding. The two 12-bit DACs 
have two independently controllable, software programmable output 
ranges of ±5V and ±10V.

The minimum DAC code is -2048 (-5 or -10V) and the maximum code is 
+2047 (+4.9976 or +9.9951V).

Select the analog output range by using the Gain2Code support function 
that returns the hardware value to the 

channelGain 

field (

startGainCode 

VB property) of the Service Request. Select a gain of -1 for ±5V and a 
gain of -2 for ±10V. The negative sign implies bipolar operation. 
(Unipolar mode is not available for analog output).

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-1800ST Series












































































































































Отзывы:

Нет отзывов