manualshive.com logo in svg

Keithley DAS-1800ST Series, Руководство пользователя, Страница: 20 / 139

Поделиться
Скачать
Keithley DAS-1800ST Series Скачать руководство пользователя страница 20

 

1-2

Overview

 

●

 

DAS-1802HR boards acquire data at up to 100 ksamples/s and 16-bit 
resolution.

 

●

 

DAS-1800ST-DA Series boards contain four 12-bit DACs 
(digital-to-analog converters) whose channels are updated 
simultaneously.

 

●

 

DAS-1802HR-DA boards contain two 16-bit DACs that are updated 
simultaneously.

 

●

 

A 1024-location FIFO (first-in, first-out data buffer) ensures data 
integrity at all sampling rates.

 

●

 

A 256-location channel-gain queue supports high-speed sampling at 
the same or different gains, in sequential or non-sequential channel 
order, and at the board’s maximum acquisition rate.

 

●

 

Burst-mode data acquisition emulates simultaneous-sample-and-hold 
(SSH) capability.

 

●

 

The DAS-1800ST Series boards support external SSH hardware; 
DAS-1800ST Series boards support EXP-1800 expansion accessories 
operated at gains of 1 and 50, while DAS-1802HR boards support 
EXP-1800 accessories at a gain of one only.

 

●

 

External expansion accessories allow a board to acquire data from up 
to 256 channels at the board’s maximum acquisition rate.

 

●

 

Dual-channel DMA (Direct Memory Access) operation allows the 
acquisition of more than 64 ksamples.

 

●

 

Pulsed interrupts allow multiple boards to share interrupt levels.

 

●

 

Hardware trigger and gate for A/D conversions have 
software-selectable polarity.

 

●

 

Triggering capabilities support pre-, post-, and about-trigger 
acquisitions.

 

●

 

The boards have four digital inputs.

 

●

 

The boards have four digital outputs with a latch strobe.

 

●

 

All user connections are made through the 50-pin main I/O connector 
at the rear panel of the computer.

 

●

 

All features are software-programmable except for a board’s base 
address switch.

 

●

 

The boards provide ±15V and +5V power for external circuitry.

For more information on these features, refer to the Functional 
Description in Section 2.

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-1800ST Series












































































































































Отзывы:

Нет отзывов