manualshive.com logo in svg

Keithley DAS-1800ST Series, Руководство пользователя, Страница: 46 / 139

Поделиться
Скачать
Keithley DAS-1800ST Series Скачать руководство пользователя страница 46

Analog Output Features

2-23

Analog Output Features

DAS-1800ST-DA Series and DAS-1802HR-DA boards contain an analog 
output section. The following sections discuss the features of the analog 
output sections for each of these board types.

DAS-1800ST-DA Series Boards

The analog output section of a DAS-1800ST-DA Series board contains 
four 12-bit DACs. Each DAC has a fixed voltage range of ±10V and 
powers up to 0V at reset. Data coding is 2’s complement. The four DACs 
have a capacitive load drive up to 100µF and an output current drive of up 
to ±5mA. You can use interrupts generated by the onboard pacer clock to 
pace the analog output when the analog inputs are either disabled or timed 
by an external pacer clock. You can also write single values to the DACs. 
The analog output section of DAS-1800ST-DA Series boards does not 
support DMA operations.

DAS-1802HR-DA Boards

The analog output section of a DAS-1802HR-DA board contains two 
16-bit DACs. Each DAC has a fixed voltage range of ±10V and powers up 
to 0V at reset. Data coding is 2’s complement. The two DACs have a 
capacitive load drive up to 100µF and an output current drive of up to 
±5mA (short-circuit current is about 25mA). You can use interrupts 
generated by the onboard pacer clock to pace the analog output when the 
analog inputs are either disabled or timed by an external pacer clock. You 
can also write single values to the DACs. The analog output section of 
DAS-1802HR-DA boards does not support DMA operations.

Digital I/O Features

DAS-1800ST/HR Series boards contain four digital inputs (DI 0 to DI 3) 
and four digital outputs (DO 0 to DO 3). Logic 1 on an I/O line indicates 
that the input/output is high (greater than 2.0V); logic 0 on an I/O line 
indicates that the input/output is low (less than 0.8V). The digital inputs 
are compatible with TTL-level signals. These inputs are provided with 

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-1800ST Series












































































































































Отзывы:

Нет отзывов