manualshive.com logo in svg

Keithley DAS-1700 Series, Руководство пользователя

Серия Keithley DAS-1700 - это высококачественные измерительные системы сбора данных для улучшения производительности и точности измерений. Здесь вы можете бесплатно скачать инструкции по эксплуатации для этой серии. Загрузите их с {вебсайт}.

Поделиться
Скачать
background image

6  

•

  Preface

Keithley DAS-1700 Series

Limited Warranty

Scientific Software Tools, Inc. warrants that the software will perform substantially in accordance with the written materials and that

the program disk, instructional manuals and reference materials are free from defects in materials and workmanship under normal use
for 90 days from the date of receipt. All express or implied warranties of the software and related materials are limited to 90 days.

Except as specifically set forth herein, the software and accompanying written materials (including instructions for use) are provided

“as is” without warranty of any kind. Further, Scientific Software Tools, Inc. does not warrant, guarantee, or make any representations
regarding the use, or the results of the use, of the software or written materials in terms of correctness, accuracy, reliability, currentness,
or otherwise. The entire risk as to the results and performance of the software is assumed by Licensee and not by Scientific Software
Tools, Inc. or its distributors, agents or employees.

EXCEPT AS SET FORTH HEREIN, THERE ARE NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT

NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH
RESPECT TO THE SOFTWARE, THE ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

Remedy. Scientific Software Tools’ entire liability and the Licensee’s exclusive remedy shall be, at Scientific Software Tools’ option,

either (a) return of the price paid or (b) repair or replacement of the software or accompanying materials. In the event of a defect in
material or workmanship, the item may be returned within the warranty period to Scientific Software Tools for a replacement without
charge, provided the licensee previously sent in the limited warranty registration board to Scientific Software Tools, Inc., or can furnish
proof of the purchase of the program. This remedy is void if failure has resulted from accident, abuse, or misapplication. Any
replacement will be warranted for the remainder of the original warranty period.

NEITHER SCIENTIFIC SOFTWARE TOOLS, INC. NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION,

PRODUCTION, SALE OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL,
OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION AND THE LIKE) ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT EVEN
IF SCIENTIFIC SOFTWARE TOOLS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, OR LIMITATIONS ON DURATION OF AN IMPLIED WARRANTY, THE ABOVE LIMITATIONS MAY NOT APPLY TO
LICENSEE.

This agreement is governed by the laws of the Commonwealth of Pennsylvania.

StockCheck.com

Содержание DAS-1700 Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для DAS-1700 Series

Aaeon UP Squared 6000 Edge Computing Kit User Manual preview
UP Squared 6000 Edge Computing Kit
Бренд: Aaeon Страницы: 59
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Бренд: Cabletron Systems Страницы: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Бренд: Cabletron Systems Страницы: 4
Vivotek NR8401 User Manual preview
NR8401
Бренд: Vivotek Страницы: 136
DAQ system PCIe-FRM13 User Manual preview
PCIe-FRM13
Бренд: DAQ system Страницы: 41
DAQ system PCIe-SER01 User Manual preview
PCIe-SER01
Бренд: DAQ system Страницы: 19
addlink SPIDER N4 Installation Manual preview
SPIDER N4
Бренд: addlink Страницы: 9
SIIG 1394 Dual-Port CardBus Quick Installation Manual preview
1394 Dual-Port CardBus
Бренд: SIIG Страницы: 8
Arduino ABX00061 Reference Manual preview
ABX00061
Бренд: Arduino Страницы: 25
Divio SRA311-008P8 Series Installation Manual preview
SRA311-008P8 Series
Бренд: Divio Страницы: 4
ZALMAN ZM-2HC2 User Manual preview
ZM-2HC2
Бренд: ZALMAN Страницы: 8
Uniflair PCOWeb Instruction Manual preview
PCOWeb
Бренд: Uniflair Страницы: 24
National Instruments SC-2040 User Manual preview
SC-2040
Бренд: National Instruments Страницы: 56
JETWAY I848ASR1A User Manual preview
I848ASR1A
Бренд: JETWAY Страницы: 47
ZyXEL Communications ZyAIR B-100 Quick Installation Manual preview
ZyAIR B-100
Бренд: ZyXEL Communications Страницы: 23
Fast FV3000-W2K Instruction Manual preview
FV3000-W2K
Бренд: Fast Страницы: 66
Renesas H8SX1664 User Manual preview
H8SX1664
Бренд: Renesas Страницы: 21
BOSER Technology HS-4703 Manual preview
HS-4703
Бренд: BOSER Technology Страницы: 78

Бренды по названию

Популярные бренды

Загрузить еще бренды