Keithley 708A, Инструкция по эксплуатации

Страница: 20 / 167

General Information
1-2
1.6 Specifications
Model 708A specifications are located at the front of this
manual. These specifications are exclusive of matrix card
specifications, which are located in their appropriate instruc-
tion manual.
1.7 Unpacking and inspection
1.7.1 Inspection for damage
Upon receiving the Model 708A, carefully unpack the unit
and inspect it for any obvious signs of physical damage. Re-
port any damage to the shipping agent immediately. Save the
original packing carton for possible future shipment. If in-
stalling a matrix card at this time, be sure to follow the addi-
tional handling precautions explained in the appropriate
matrix card instruction manual.
1.7.2 Shipment contents
The following items are included with every Model 708A or-
der:
• Model 708A Switching System.
• Model 708A Instruction Manual.
• Fixed rack mount kit (includes mounting hardware).
• Removable feet (for bench-top use — includes hard-
ware).
• Additional accessories as ordered.
1.8 Repacking for shipment
Should it become necessary to return the Model 708A for re-
pair, carefully pack the unit in its original packing carton or
the equivalent, and perform the following:
• Call the Repair Department at 1-800-552-1115 for a
Repair Authorization (RMA) number.
• Advise as to the warranty status of the switching sys-
tem.
• Write ATTENTION REPAIR DEPARTMENT and the
RMA number on the shipping label.
• Fill out and include the service form located at the back
of this manual.
1.9 Optional accessories
The following accessories are available for the Model 708A.
Adapter and switching matrix cards
Model 7070 Universal Adapter Card
— The Model 7070
card installs in the Model 708A and is jumper-selectable for
use either as a backplane extender or a breadboard. It has
quick-disconnect screw terminals and 10ft. ribbon cables.
Model 7071 General Purpose Matrix Card
— The Model
7071 card has 8 rows by 12 columns of three-pole Form A
switching for general purpose applications. It has mass ter-
minated connectors in addition to quick-disconnect screw
terminals.
Model 7071-4 Dual 4
×
12 General Purpose Matrix Card
— The Model 7071-4 card has two banks of four signal paths
of three-pole switching. Row and column connections to the
matrix are through 38-pin mass terminated connectors.
Model 7072 Semiconductor Matrix Card
— The Model
7072 card has 2 rows by 12 columns of two-pole Form A for
low current switching, 4 rows by 12 columns of two-pole
Form A for general purpose switching, and 2 rows by 12 col-
umns of one-pole Form A for C-V switching. It has three-lug
triaxial connectors.
Model 7072-HV High Voltage Matrix Card
— The Model
7072-HV switches low level, high voltage, and high imped-
ance signals for semiconductor parametric tests. It has two
low current paths, four general purpose paths, and two C-V
paths. Connections to the matrix are through triax connec-
tors.
Model 7073 Coaxial Matrix Card
— The Model 7073 card
has 8 rows by 12 columns of one-pole Form A switching (up
to 30MHz) for applications with single-ended instruments. It
has BNC connectors.
Model 7074-D Eight 1
×
12 General Purpose Multiplexer
Card
— This card has eight banks of one signal path of
three-pole switching. Bank connections are through four 75-
pin mass terminated connectors; row connections are
through one 38-pin mass terminated connector.
Model 7075 Eight 1
×
12 Two-Pole Multiplexer Card
—
The Model 7075 is a general purpose multiplex switching
card that consists of eight banks of independent 1
×
12 mul-
tiplexer switching. Eight 25-pin D connectors are provided
for bank connections and one for row connections.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com