manualshive.com logo in svg

Keithley 2002, Руководство пользователя

"Keithley 2002" - прибор, который является незаменимым помощником для профессионалов. Для начала работы с этим устройством необходимо скачать "Getting Started Manual" с нашего сайта. Скачивайте бесплатно руководство по эксплуатации только на manualshive.com. Легко и просто!

Поделиться
Скачать
background image

 

Front Panel Operation

 

2-84

tinuously. Auto-repeat of cursor keys is disabled when
adjacent channel next display is shown.

3. With the unit in the normal display mode, press the

PREV key to enable adjacent channel display. Note that
the lower and upper adjacent channel readings will ap-
pear on the lower display section. 

4. Manually scan through channels with the 

 or 

 key.

Note that the adjacent display channel numbers track the
channel on the main display.

5. Press the NEXT key to cancel the alternate channel dis-

play mode, then use the CHAN key to open channels
when done scanning.

 

Scanning internal channels

 

Internal channels are scanned by configuring scan channels
and programming the Model 2002 to perform a scan. The
following steps demonstrate the basic procedures for per-
forming basic scanning using the Model 2001-SCAN scan-
ner card.

 

NOTE

 

Depending on selected trigger modes, it
may be necessary to trigger the instrument
to perform scanning. Refer to paragraph
2.7 for detailed information on triggering.

 

Step 1: Configure channels

 

Use CONFIG-CHAN to select the measurement functions
for each of the scanner channels as follows:

1. Press CONFIG-CHAN. The instrument will display the

following menu:

 

CONFIGURE CHANNELS

 

INTERNAL-CHANS

EXTERNAL-INPUTS 

 SAVE-ALT-FCN

RESTORE-ALT-FCN

 

2. Select INTERNAL-CHANS, then press ENTER. The

multimeter will display the following menu:

 

SET INTERNAL CHANS

 

1=DCV

2=DCV

3=DCV

4=DCV

5=DCV 

 6=DCV

7=DCV

8=DCV

9=DCV

10=DCV

 

3. Using the cursor keys, select the desired channel (press

the right cursor key to display channels 6 through 10).

4. Using the range keys, select the desired measurement

function: DCV, ACV, 

 

Ω

 

2W, 

 

Ω

 

4W, FRQ, TMP, ALT,

JN1, JN2, JN3, JN4, JN5, --- (None).

5. Repeat steps 3 and 4 for each of the channels you wish

to scan. Note: Select --- (none) to omit a channel from
the scan list.

6. Examine all ten channels to verify omitted channels and

paired (PRD) channels.

7. After selecting all measurement functions, press EN-

TER to return to normal display.

 

Step 2: Select internal scan list

 

Use the SCAN OPERATION menu to select the internal
scan list as follows:

1. Press CONFIG-SCAN. The Model 2002 will display

the following:

 

SCAN OPERATION

 

INTERNAL

EXTERNAL

RATIO

DELTA

 

2. Select INTERNAL, then press ENTER.

 

Step 3: Start scan

 

After configuring channels and scan list, simply press the
SCAN key to begin scanning. The instrument will prompt
you to configure the scan count and scan timer, and to enable
data storage. Pressing the ENTER key will scan through
selected channels and make a measurement on each channel
using the previously selected measurement function for each
channel. When the scan has completed, you can recall stored
data and/or scan again. To disable scanning, press the EXIT
key.

Using ratio and delta

The Model 2002 can display the difference (DELTA) or quo-
tient (RATIO) between the signal on any two internal scan-
ner channels. The following paragraphs discuss ratio and
delta calculations and also give step-by-step procedures for
using ratio and delta. 

When the instrument is first placed in the ratio or delta mode,
it will close the scanner reference channel and then wait for
a trigger. When the reading is triggered, the unit will make a
measurement on the reference channel, switch to the mea-
surement channel, and then take a second measurement.
After measuring the measurement channel, the unit will
compute and display the ratio or delta value, and switch back
to the reference channel to wait for the next trigger.

The steps below outline the basic procedure for making ratio
measurements. The procedure for delta measurements is
essentially the same, except that you would select DELTA in
the appropriate menu.

Step 1: Connect inputs

Input signals must be connected to the two channels you
intend to define as measurement and reference channels.

Содержание 2002















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2002

Monacor DMT-1050 Instruction Manual preview
DMT-1050
Бренд: Monacor Страницы: 49
SONS Online Systems VC Node Mux User Manual preview
VC Node Mux
Бренд: SONS Online Systems Страницы: 11
Kusam-meco KM 805s Operation Manual preview
KM 805s
Бренд: Kusam-meco Страницы: 12
Kusam-meco KM 655 Operation Manual preview
KM 655
Бренд: Kusam-meco Страницы: 12
Kusam-meco KM 839 Operation Manual preview
KM 839
Бренд: Kusam-meco Страницы: 16
IDEAL Resi-Pro 310 Series Instruction Manual preview
Resi-Pro 310 Series
Бренд: IDEAL Страницы: 3
Gossen MetraWatt METRAHIT EBASE Operating Instructions Manual preview
METRAHIT EBASE
Бренд: Gossen MetraWatt Страницы: 72
Gossen MetraWatt METRA HIT 28 S Operation Instructions Manual preview
METRA HIT 28 S
Бренд: Gossen MetraWatt Страницы: 80
Miranda ADX-102i Manual To Installation And Operation preview
ADX-102i
Бренд: Miranda Страницы: 25
TECPEL OS-81B Manual preview
OS-81B
Бренд: TECPEL Страницы: 54
koban KMD 03 Instruction Manual preview
KMD 03
Бренд: koban Страницы: 36
Amprobe AM-250 User Manual preview
AM-250
Бренд: Amprobe Страницы: 50
ETEKCITY MSR-C600 Operating Manual preview
MSR-C600
Бренд: ETEKCITY Страницы: 16
ETEKCITY MSR-A2000 User Manual preview
MSR-A2000
Бренд: ETEKCITY Страницы: 40
Campbell AM16 Instruction Manual preview
AM16
Бренд: Campbell Страницы: 46
Wavetek Meterman 220 Operator'S Manual preview
Meterman 220
Бренд: Wavetek Страницы: 44
Omega HHM29 User Manual preview
HHM29
Бренд: Omega Страницы: 18
Baudcom BD-OP-MUX30 User'S Reference Manual preview
BD-OP-MUX30
Бренд: Baudcom Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды