Sensitivity
Sensitivity is editable for the various sensors using the
sensitivity
dial at the bottom of
each of the edit panes. This will adjust the on threshold for the sensor. If the sensitivity
knob is all the way up, the on threshold will be lower, allowing less pressure before
registering any activity. If the sensitivity is all the way down, the on threshold will be
higher, requiring more pressure before registering any activity.
The Sensitivity dial is global for all controls of that type.
E
xample
: Adjusting the sensitivity in one of the Pad Edit Panes will adjust the sensitivity
for all pad edit panes. The Sensitivity dials for the Horizontal Sliders are linked, the Vertical
Sliders, the Left/Right Buttons, etc...
Local LED Control
In each Edit Pane, next to the Sensitivity dial, is a check box for turning
Local LED Control
on and off. Without sending LED messages to the QuNeo from another application or
device, the QuNeo’s LEDs will automatically respond to touch. This built-in LED behavior
can be enabled using the Local LED Control check box. Like the sensitivity dial, the Local
LED Control check box is global for all controls of that type.
Hint
: If Local LED Control is disabled and the QuNeo is not receiving MIDI notes for
controlling LEDs, the QuNeo will not light up at all.
In the Left/Right, Up/Down, and Rhombus Button edit panes, if Bank Switching is enabled,
Local LED Control cannot be disabled.
The Local LED Control check box is global for all controls of that type.
E
xample
: Changing the Local LED Control in one of the Pad Edit Panes will adjust the
sensitivity for all pad edit panes. The Local LED Control check boxes for the Horizontal
Sliders are linked, the Vertical Sliders, the Left/Right Buttons, etc...
47
