Up/Down Button Edit Pane
The Up/Down buttons are positioned on either side of
the Long Slider. If the “
Enable Bank Switching
” box is
checked, these button pairs act as bank controls for the
Rotaries, Vertical Sliders, or Long Slider. See the
and Horizontal Slider Edit Pane
, or
chapters for more info. The banks will be
indicated by the LEDs of the 2 buttons.
For information about how the LEDs indicate the banks,
see the
chapter of this
manual.
If Bank Switching is disabled, each button can output an
assigned Note or Pressure CC#.
To disable a source, set the number box below 0 to “off”.
Enable velocity sensitivity for MIDI notes with the “
Vel
”
check boxes. If unchecked the velocity of the note (if the
note is enabled) will be fixed at 127.
The Sensitivity and Local LED Control parameters are at the very bottom of the edit pane.
For more information on these please reference the
chapters in this section of the manual.
Rhombus Button Edit Pane
The Rhombus button is positioned under the Rotaries
and above the Vertical Sliders. If the “
Enable Bank
Switching
” box is checked, this button acts as a bank
control for the Rotaries, Vertical Sliders, or Long Slider.
See the
Vertical and Horizontal Slider Edit Pane
, or
chapters for more
info. The banks will be indicated by the LEDs of the
button.
For information about how the LEDs indicate the banks,
see the
chapter of this
manual.
If Bank Switching is disabled, the button can output an
assigned Note or Pressure CC#.
To disable a source, set the number box below 0 to “off”.
Enable velocity sensitivity for the MIDI note with the “
Vel
”
check boxes. If unchecked the velocity of the note (if the
note is enabled) will be fixed at 127.
The Sensitivity and Local LED Control parameters are at the very bottom of the edit pane.
For more information on these please reference the
chapters in this section of the manual.
46
